Operation Manual

4. CONTROL ELEMENTS
LEFT
RIGHT
PHONES
MAIN
OUTPUT
O
LE
O
R
-
80
AM
9
SPOTLIGHT
This switch is used to turn the main power ON and OFF.
some Competitors do not offer a Power switch in similar
models.InsuchcasethemixerwillbepermanentlyON(iftheACAdapteris
connected to an AC outlet. This may turn out in heat problems, power
consumption and damages to the unit in case of lightening ).
A CLOSER LOOK:
This connector is used to connect the 18VAC adapter supplied by LTO
Company only.
Connect the supplied AC Adaptor into this socket and then to the AC outlet.
THE OUTPUT CONNECTIONS
Connecting these Left and Right Output to an
amplifier or a pair of powered speakers. You
may decide to plug in an equalizer or a dynamic
processor in between these outputs and your
amplifier/powered speakers.
The stereo signal at this output is controlled by
the PHONES control. Through this output (via
headphones of powered Studio Monitors) you can
listen either to the Main Mix or to the signal
applied to the TAPE IN sockets depending on the
positionsofthe2TRtoPHONESswitch.
You can record your entire session into a Tape or
DAT Recorder connected to these outputs. The
level at these sockets will be affected by the MAIN
MIX control.
15 MAIN OUT
16 PHONES OUTPUT
17 TAPE OUT
REAR PANEL DESCRIPTION
18 POWER ON/OFF SWITCH
19 AC INPUT CONNECTOR
POWER
ON
OFF
18VAC~
RATED POWER
CONSUMPTION: 8W
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: SHOCK HAZARD DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
18
19
15
L
TAPE OUT
R
17
16