Operation Manual

117
4. CONTROL ELEMENTS
2TK TO
PHONES
2TK TO
MIX
TAPE
10
L
TAPE IN
TAPE OUT
R
SPOTLIGHT
THE TAPE SECTION
Here is where you can connect line-level mono or
stereo devices such as DC-DVD Player, Tape Player,
TV, MP3, iPOD, etc. The incoming signals will be
routed directly into the MAIN MIX when the 2TK
to MIX switch is pushed in. But when the 2TK to
PHONES is pushed in, the signal will also be routed
to the PHONES Output.
9 TAPE INPUT
When you push in this switch, the signal applied to the
TAPE IN socket will be sent directly to the Main Mix
large blue Control knob. This is usually used in between
agigandanotherwhenyoustopforabeer(ormore )
and you want to give some reproduced music to the
Audience.
10 2TK TO MIX
When pushed in this switch, it will assign the signal
applied to the TAPE IN sockets to the PHONES
output sockets. You can plug in a pair of stereo
headphones to these sockets or a pair of active Studio Monitors such as LTO
M3A ( You will needaYtypeAdapter).Ifthisswitch is depressed the MAIN MIX
signal will be sent to the PHONES output sockets. You can adjust the PHONES
output signal via the PHONES control. Always turn down this control before
connecting headphones or active studio monitors.
11 2TK TO PHONES
9
11