Operation Manual

2
3. CONTROL ELEMENTS
SPOTLIGHT
Front panel
1
POWER SWITCH
It switches the amplifier ON and OFF.
2
CLIP LED
When the signal distortion reaches or surpasses 0.5% , the LED lights up. This
means the output level of signal source is too high and it is time to reduce the
input level until the LED turns off.
3
OUTPUT LIMITER LED
When the unit limits the output signal, the LED lights up.
4
POWER LED
This LED lights up when the unit is powered on.
LEVEL CONTROLS (For CH1&CH2)
Adjust the output signal level to avoid signal distortion.
5
2 31
45
LTO
R
5