Quick Start Guide

11
• Phase - Allows control of the signal's phase.
Note: This control is only available in the Low-Pass Filter window.
The Xover values can be set in the following ranges:
Output Pol- Controls the output's polarity. Allows you to invert the phase of the signal on individual outputs.
The effect operates with 5 steps in a range of between 0 and 180. In this way it's possible to set the phase of
each individual output with 5 steps within a complete 360 revolution. This function is useful when assembling
arrays of speaker enclosures, in the control of the interpolation between various enclosures or between
sections of the same system.
Output Limiter- Keeps the signal of each individual output within a set level.
• Reaction times- Adjusts between 3 types of Limiter reaction speeds:
Fast- Suited for rapid Limiter operation, normally for signals dedicated to high frequencies.
Normal- Suited for the majority of applications with signals dedicated to mid frequencies or full-range
systems.
Slow- Suited to avoid jumps in the level and for signals dedicated to low frequencies.