Operating instructions

O&C MANUAL • 1200-UP MARINE
PG. 3
SITE INSTALLATION
This Alto-Shaam
appliance must be
installed in a location
that will permit it to
function for its
intended purpose and
to allow adequate
clearance for
ventilation, proper
cleaning, and
maintenance access.
1. This appliance must be installed on a stable
and level surface.
2. DO NOT install this appliance in any area
where it may be affected by any adverse
conditions such as steam, grease, dripping
water, high temperatures, or any other severely
adverse conditions.
3. This appliance must be kept free and clear of
any obstructions blocking access for
maintenance or service.
®
TO PREVENT PERSONAL INJURY,
USE CAUTION WHEN MOVING OR
LEVELING THIS APPLIANCE.
METAL PARTS OF THIS EQUIPMENT
BECOME EXTREMELY HOT WHEN IN
OPERATION. TO AVOID BURNS,
ALWAYS USE HAND PROTECTION
WHEN OPERATING THIS APPLIANCE.
IMPROPER INSTALLATION, ALTERATION,
ADJUSTMENT, SERVICE OR MAINTENANCE
COULD RESULT IN SEVERE INJURY, DEATH
OR CAUSE PROPERTY DAMAGE.
INSTALLATION
MINIMUM CLEARANCE
REQUIREMENTS
BACK 3" (76mm)
LEFT SIDE 1" (25mm)
RIGHT SIDE 1" (25mm)
TOP 2" (51mm)