Combination Oven / Steamer ES ELECTRIC S ERI ES 6•10 10•10 7•14 10•18 12•20 20•20 VH ES-5 VH ES-10 I N STALLATION W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 USA PHONE: PRINTED IN U . S . A . 262.251.3800 • 800.558.8744 USA / CANADA FAX: WWW. ALTO - SHAAM . COM 262.251.7067 • 800.329.8744 U . S . A .
General Information Delivery / Unpacking . . . . . . . . . . . . . . . . . .1. Safety Procedures and Precautions . . . . . . . . .2. Specifications Options . . . . . . . . . . . . . . . . . . . . . . . . . . .3. 6•10es . . . . . . . . . . . . . . . . . . . . . . . . . . . .4. 6•10esi . . . . . . . . . . . . . . . . . . . . . . . . . . .5. 6•10esiN . . . . . . . . . . . . . . . . . . . . . . . . . .6. 10•10es . . . . . . . . . . . . . . . . . . . . . . . . . . .7. 10•10esi . . . . . . . . . . . . . . . .
® DELIVERY U N PA C K I N G This Alto-Shaam appliance has been thoroughly tested and inspected to insure only the highest quality unit is provided. Upon receipt, check for any possible shipping damage and report it at once to the delivering carrier. See Transportation Damage and Claims section located in this manual. This appliance, complete with unattached items and accessories, may have been delivered in one or more packages.
SAFETY PROCEDURES AND PRECAUTIONS Knowledge of proper procedures is essential to the safe operation of electrically and/or gas energized equipment. In accordance with generally accepted product safety labeling guidelines for potential hazards, the following signal words and symbols may be used throughout this manual. DANGER Used to indicate the presence of a hazard that WILL cause severe personal injury, death, or substantial property damage if the warning included with this symbol is ignored.
C O M M O N S P E C I F I C AT I O N S ® COMBITHERM ■ CombiGuard™ Triple-Guard Water Filtration System ( INCLUDES 1 CARTRIDGE ) FI-23014 ■ CombiGuard™ Replacement Filter ■ Fry Basket, 12" ■ Grilling Grate, 12" X X FI-26356 20" (325mm x 530mm) BS-26730 20" (325mm x 530mm) SH-26731 ■ Oven Cleaner — SPECIALLY FORMULATED FOR COMBITHERM OVENS TWELVE (12) ■ Scale Free™ ➥ ( CITRUS CASE = CONTAINERS / CASE , 1 QUART ( C .
• 1 0 ES S P E C I F I C A T I O N S ® COMBITHERM 30" (761mm) 2" (50mm) 49-1/8" (1247mm) I N S TA L L AT I O N R E Q U I R E M E N T S Oven must be installed level. Hood installation is required. Water supply shut-off valve and back-flow preventer.
6 • 1 0 ES i S P E C I F I C A T I O N S ® COMBITHERM 30" (761mm) 2" (50mm) 49-1/8" (1247mm) I N S TA L L AT I O N R E Q U I R E M E N T S Oven must be installed level. Hood installation is required. Water supply shut-off valve and back-flow preventer. 4-15/16" (125mm) 33-1/8" (840mm) 6•10ESi 440-480 380-415 208-240 208-240 VOLTAGE CYCLE/HZ PHASE at 208 1* at 240 at 208 50/60 3 at 240 at 380 at 440 * AMPS AWG 6 47.0 3 Wire plus ground 23.3/ph AWG 12 15.
6 • 1 0 ES iN S P E C I F I C A T I O N S ® COMBITHERM 21-7/8" (555mm) Water Drain (Side Back) 2" (50mm) 41-1/16" (1042mm) I N S TA L L AT I O N R E Q U I R E M E N T S Oven must be installed level. Hood installation is required. Water supply shut-off valve and back-flow preventer. 5" (126mm) 25" (635mm) 6•10ESiN 440-480 380-415 208-240 208-240 VOLTAGE CYCLE/HZ PHASE at 208 1* at 240 at 208 50/60 3 at 240 at 380 at 440 * 472 lb 40" 37" X 6 3 Wire plus ground 23.3/ph AWG 12 15.
1 0 • 1 0 ES S P E C I F I C A T I O N S ® COMBITHERM 30" (761mm) Water Drain (Back Side) 2" (50mm) 33-1/16" (840mm) 46-7/8" (1190mm) I N S TA L L AT I O N R E Q U I R E M E N T S Oven must be installed level. Hood installation is required. Water supply shut-off valve and back-flow preventer.
1 0 • 1 0 ES i S P E C I F I C A T I O N S ® COMBITHERM 30" (761mm) 2" (50mm) 33-1/16" (840mm) 46-7/8" (1190mm) I N S TA L L AT I O N R E Q U I R E M E N T S Oven must be installed level. Hood installation is required. Water supply shut-off valve and back-flow preventer. 4-15/16" (125mm) USING A WATER SUPPLY NOT MEETING ALTO-SHAAM'S MINIMUM WATER QUALITY STANDARDS WILL VOID THIS WARRANTY.
1 0 • 1 0 ES iN S P E C I F I C A T I O N S ® COMBITHERM 21-15/16" (557mm) 35-7/8" (910mm) Water Drain (Side Back) 35-11/16" (905mm) 33-7/8" (860mm) 2" (50mm) 25" (635mm) 41-1/16" (1043mm) I N S TA L L AT I O N R E Q U I R E M E N T S Oven must be installed level. Hood installation is required. Water supply shut-off valve and back-flow preventer. 5" (126mm) USING A WATER SUPPLY NOT MEETING ALTO-SHAAM'S MINIMUM WATER QUALITY STANDARDS WILL VOID THIS WARRANTY.
7 • 1 4 ES S P E C I F I C A T I O N S ® COMBITHERM Decalcification Port 12-3/4" (323mm) 15-1/2" (393mm) 22-3/8" (568mm) 2-5/16" (58mm) 4-11/16" (120mm) FRONT VIEW Helvetica TOP VIEW ight Condensed I N S TA L L AT I O N R E Q U I R E M E N T S pt Oven must be installed level. Hood installation is required. Water supply shut-off valve and back-flow preventer.
7 • 1 4 ES i S P E C I F I C A T I O N S ® COMBITHERM 12-3/4" (323mm) 15-1/2" (393mm) 22-3/8" (568mm) 2-5/16" (58mm) 4-11/16" (120mm) Low Pressure Valve FRONT VIEW elvetica TOP VIEW ght Condensed I N S TA L L AT I O N R E Q U I R E M E N T S pt Oven must be installed level. Hood installation is required. Water supply shut-off valve and back-flow preventer.
1 0 • 1 8 ES S P E C I F I C A T I O N S ® COMBITHERM 43-7/8" (1114mm) 41-15/16" (1064mm) 42-13/16" (1087mm) Electrical Connection (Bottom) 6-1/4" (158mm) Treated Water Intake (Bottom) 69-3/8" (1761mm) Steam Vents (Top) Untreated Water Intake (Bottom) 40-7/16" (1026mm) 40-1/8" (1019mm) 7-9/16" (192mm) Water Drain (Side Back) Decalcification Port 12-3/4" (323mm) 15-1/2" (393mm) 22-3/8" (568mm) 4-11/16" (120mm) 2-5/16" (58mm) 32-7/8" (834mm) 30" (760mm) 25-5/8" (650mm) 8-11/16" (219mm) 4
1 0 • 1 8 ES i S P E C I F I C A T I O N S ® COMBITHERM 43-7/8" (1114mm) 41-15/16" (1064mm) Electrical Connection (Bottom) 33-1/8" (840mm) 32-7/8" (834mm) 6-1/4" (158mm) 40-1/8" (1019mm) Steam Vents (Top) 69-3/8" (1761mm) Untreated Water Intake (Bottom) Low Pressure Valve (Top) Treated Water Intake (Bottom) 42-13/16" (1087mm) 7-9/16" (192mm) Water Drain (Side Back) 12-3/4" (323mm) 22-3/8" (568mm) 15-1/2" (393mm) 4-11/16" (120mm) 2-5/16" (58mm) 40-7/16" (1026mm) 30" (760mm) Water Drain (Bo
1 2 • 2 0 ES S P E C I F I C A T I O N S ® 46-3/4" (1186mm) 44-3/4" (1136mm) 2" (50mm) WAT E R R E Q U I R E M E N T S TWO (2) COLD WATER INLETS - DRINKING QUALITY ONE (1) TREATED WATER INLET: 3/4" NPT* ONE (1) UNTREATED WATER INLET: 3/4" NPT* LINE PRESSURE: 30 to 90 psi 2.8 to 6.2 bar WATER DRAIN: 1-1/2" CONNECTION WITH AIR GAP * Can manifold off of one 3/4" line. USING A WATER SUPPLY NOT MEETING ALTO-SHAAM'S MINIMUM WATER QUALITY STANDARDS WILL VOID THIS WARRANTY.
2 0 • 2 0 ES S P E C I F I C A T I O N S ® COMBITHERM 51-15/16" (1319mm) 40-15/16" (1039mm) WAT E R R E Q U I R E M E N T S TWO (2) COLD WATER INLETS - DRINKING QUALITY ONE (1) TREATED WATER INLET: 3/4" NPT* ONE (1) UNTREATED WATER INLET: 3/4" NPT* LINE PRESSURE: 30 to 90 psi 2.8 to 6.2 bar WATER DRAIN: 1-1/2" CONNECTION WITH AIR GAP * Can manifold off of one 3/4" line.
L O C AT I O N S I T E & I N S TA L L AT I O N R E Q U I R E M E N T S ® COMBITHERM DANGER DANGER IMPROPER INSTALLATION, ALTERATION, ADJUSTMENT, SERVICE, OR MAINTENANCE COULD RESULT IN SEVERE INJURY, DEATH OR CAUSE PROPERTY DAMAGE. AVERTISSEMENT : UNE INSTALLATION, UN AJUSTEMENT, UNE ALTÉRATION, UN SERVICE OU UN ENTRETIEN NON CONFORME AUX NORMES PEUT CAUSER DES DOMMAGES À LA PROPRIÉTÉ, DES BLESSURES OU LA MORT.
® L O C AT I O N S I T E & I N S TA L L AT I O N R E Q U I R E M E N T S COMBITHERM VENTILATION REQUIREMENTS A steam ventilation hood is mandatory for the operation of the oven. The ventilation hood must be installed in accordance with local building codes for the steam exhaust and must protrude 12-inches to 20-inches (300 to 500mm) over the front side of the oven. A grease filter must be located in the protruding area of the hood.
L O C AT I O N S I T E & I N S TA L L AT I O N R E Q U I R E M E N T S ® COMBITHERM POSITIONING REQUIREMENTS ❑ In order to ensure proper ventilation, a minimum distance of at least 6-inches (152mm) must be kept from the control panels side (left) of the oven and any adjoining surfaces. NOTE: Additional clearance is needed for service access. A minimum distance of 18-inches is strongly recommended.
E L E C T R I C A L & I N S TA L L AT I O N R E Q U I R E M E N T S ® COMBITHERM DANGER DANGER To avoid electrical shock, this appliance MUST be adequately grounded in accordance with local electrical codes or, in the absence of local codes, with the current edition of the National Electrical Code ANSI/NFPA No. 70. In Canada, all electrical connections are to be made in according with CSA C22.1, Canadian Electrical Code Part 1 or local codes.
I N S TA L L AT I O N R E Q U I R E M E N T S ® COMBITHERM D R I P T R AY I N S TA L L AT I O N The appliance is shipped without the drip tray installed. This must be installed before equipment operation begins. Position drip tray mounting bracket beneath oven. Secure with lock washer and phillips screws supplied. Slide drip tray assembly into mounting bracket. Secure with lock washer and nut. Attach drip tray hose to drip tray assembly. Secure the drain fitting connection with the 19mm clamp.
® WAT E R S U P P LY & I N S TA L L AT I O N R E Q U I R E M E N T S COMBITHERM WAT E R Q U A L I T Y R E Q U I R E M E N T S USE A DRINKING QUALITY, COLD WATER SUPPLY ONLY Water quality is of critical importance when installing steam producing equipment of any kind, particularly high temperature steam producing equipment. Water that is perfectly safe to drink is composed of chemical characteristics that directly affect the metal surfaces of steam producing equipment.
WAT E R S U P P LY & I N S TA L L AT I O N R E Q U I R E M E N T S ® COMBITHERM Flush the water line at the installation site before connecting the oven to the water supply. A hose connector is supplied for flexible hose connection to the COLD water source. WAT E R R E Q U I R E M E N T S TWO (2) COLD WATER INLETS - DRINKING QUALITY 3/4" NPT* ONE (1) UNTREATED WATER INLET: 3/4" NPT* LINE PRESSURE: 30 to 90 psi 2.8 to 6.
WAT E R S U P P LY & I N S TA L L AT I O N R E Q U I R E M E N T S ® COMBITHERM S H U T - O F F V A LV E S H O W N IN THE OFF POSITION NOTE: THE SHUT-OFF VALVE MUST BE IN THE OPEN POSITION WHEN THE OVEN IS BEING USED. ITEM FI-23014 Alto-Shaam now offers an improved water filtration system for Combitherm®. The CombiGuard™ triple-guard water filtration system filters dirt, sediment, and other debris as small as 1/2 micron.
WAT E R S U P P LY & I N S TA L L AT I O N R E Q U I R E M E N T S ® COMBITHERM WAT E R D R A I N A G E The oven must discharge through an indirect waste pipe by means of an air gap. The drain fitting is supplied with a 1-1/2-inch (41mm) NPT thread on one end and a 1-1/2-inch (41mm) barbed connection on the opposite end. AVERAGE DRAIN WATER A union is required. Install a 1-1/2-inch TEMPERATURE (41mm) diameter connection, drain line and clamp into place.
I N S TA L L AT I O N C H E C K L I S T ® COMBITHERM Use this list as a final check of oven installation conformance. Damage directly attributed to improper set up, installation, or cleaning can invalidate warranty claims. CLEARANCES: Left: 6” (152mm) — Service access of 18” (457mm) recommended. 20” (508mm) from heat producing equipment.
ERROR CODES ® COMBITHERM CONTROL RESET There is a remote possibility in the day-to-day operation of the Combither m that the control could lock or freeze. If this occurs, the control is easy to reset. PRESS AND HOLD THE POWER KEY FOR A PERIOD OF 5 SECONDS. Release the POWER KEY. The control will will reset itself within approximately 15 seconds. WHEN RESET, THE DISPLAY WILL INDICATE THE TIME AND DATE AND THE CONTROLS WILL BE FULLY FUNCTIONAL.
ERROR CODES ® COMBITHERM ERROR CODES AND REASONS (continued) Error Code E13 Display Shows Excess Steam Gen Temp When does the error occur? ES units only: Activated if the temperature of the steam generator probe (B-4) is higher than 248°F for 26 seconds. Possible reason • Problem with water level probe. • Scale build-up inside steam generator. • Steam element contactor is stuck. • Connection issue with B-4 probe. • Faulty B-4 probe. ESi units only: • Jumper on X-3 is improperly positioned.
ERROR CODES ® COMBITHERM ERROR CODES AND REASONS (continued) Error Code E29 Display Shows Probe Short to Frame E34 DE (Drain) Pump Failure When does the error occur? Activated if one or more of the temperature sensors were connected to GND for 5 seconds. Possible reason • Connection issue at any of the temperature sensors. • Temperature sensor shorted to ground/faulty. Activated if water level did not drop below the • Problem with water level probe.
ERROR CODES ® COMBITHERM E M E R G E N C Y O P E R AT I O N In the event of an error code, the Combitherm may be operated on a limited basis. Error conditions under which continued operation can be conducted are indicated by “Yes” in the chart shown below. When the oven malfunctions, an error code will appear in the display. PRESS THE START KEY TO ACKNOWLEDGE THE ERROR. The keys that begin to flash represent operational modes that are still usable. SELECT AND PRESS ONE OF THE COOKING MODES INDICATED.
VENTLESS HOOD OPTION ® COMBITHERM The Ventless Hood option is factory installed directly on the top of the Alto-Shaam Combitherm oven. The hood is designed to vent clean air back into the kitchen, filtering vapors and grease. A high-power fan draws steam and fumes into the hood intake and out the top surface exhaust vent. Fumes and vapors are circulated through filters draining the condensation through a drain at the rear of the hood.
VENTLESS HOOD OPTION ® COMBITHERM O P E R AT I O N Turn the ventless hood power knob "ON". Wait five seconds, then press the "COMBI RESET" button. Turn the Combitherm oven power "ON". There are a number of safety features incorporated into the operation of the hood which are directly related to the interaction of hood function and the operation of the combi oven/steamer. I N D I C AT O R L I G H T S If the indicator lights do not illuminate, the filters may be missing or not properly aligned.
VENTLESS HOOD OPTION ® COMBITHERM CHARCOAL FILTER GREASE FILTER FI-24114 (VHES-5) FI-24102 (VHES-10) FI-24113 (VHES-5) FI-23062 (VHES-10) CLEANING AND MAINTENANCE G R E A S E F I LT E R S A N D M E TA L HOUSING (PLENUM) To ensure optimum performance from the ventless hood, it is important to establish and maintain a regular cleaning and maintenance schedule.
O R I G I N A L E Q U I P M E N T L I M I T E D WA R R A N T Y ® COMBITHERM Alto-Shaam, Inc. warrants to the original purchaser that any original part that is found to be defective in material or workmanship will, at Alto-Shaam’s option, subject to provisions hereinafter stated, be replaced with a new or rebuilt part. The labor warranty remains in effect one (1) year from installation or fifteen (15) months from the shipping date, whichever occurs first.
T R A N S P O R TAT I O N D A M A G E A N D C L A I M S ® COMBITHERM All Alto-Shaam equipment is sold F.O.B. shipping point, and when accepted by the carrier, such shipments become the property of the consignee. Should damage occur in shipment, it is a matter between the carrier and the consignee. In such cases, the carrier is assumed to be responsible for the safe delivery of the merchandise, unless negligence can be established on the part of the shipper. 1.
