Inc. Convection Oven User Manual

ManualsBrandsAlto-Shaam ManualsConvection OvenAlto-Shaam Inc. Convection Oven ASC-4E

CARE AND CLEANING

ASC-2E & ASC-4E Electric Convection Ovens - Manual Control • 16

EXTERIOR:

To help maintain the protective film coating on

polished stainless steel, clean the exterior of the

cabinet with a cleaner recommended for stainless

steel surfaces. Spray the cleaning agent on a clean

cloth and wipe with the grain of the stainless steel.

Wipe control panel, door vents and door handles,

thoroughly since these areas harbor food debris.

Clean exterior glass surfaces with a commercial

window cleaner.

DO NOT USE ABRASIVE CLEANING COMPOUNDS.

MOTOR CARE

The convection oven motor contains self-

lubricating, sealed ball bearings and is

generally maintenance-free. During operation,

the interior of the motor is cooled by air flowing

into the rear of the motor case. This is a general

operating feature when proper clearances have

been allowed.

AT THE END OF THE DAY,

UTILIZE THE COOL-DOWN MODE

AND OPEN THE OVEN DOORS.

TROUBLESHOOTING GUIDE

SERVICE

TROUBLE POSSIBLE CAUSE REMEDY

Oven has no power • Insufficient power supply

• Defective power cord or plug

• Defective power switch.

• Loose electrical connection

• Check power source.

• Check and replace if necessary.

• Check all electrical connections

Cook temperature

too high/low

• Thermostat out of calibration

• Defective thermostat

• Check Calibration using a digital

thermometer in the center of the

cavity. Calibrate if necessary

• Replace thermostat

Cook temperature too low • Defective door gasket

• Door not closing properly

• Replace Gasket

• Check latches on the top and

bottom of door.

Fan not running • Door switch defective or out of adjustment

• Motor switch tripped (2E only)

• Door not closing properly

• Adjust or replace

• Reset, Black button should

be pushed in

• Check latches on the top and

bottom of door.

Fan running but no heat • High limit tripped

• Defective element

• Reset high limit and test temperatures

• Replace element

Fan runs with door open • Door switch defective or out of adjustment • Adjust or replace