® OPERATION and CARE MANUAL CC-96 Two Tier, Self Serve Heated Display Case Models: CC-48 CC-72 CC-96 COOK/HOLD/SERVE SYSTEMS W 1 6 4 N 9 2 2 1 W a t e r S t r e e t ● P.O. Box 450 ● Menomonee Falls, Wisconsin 53052-0450 U.S.A. PHONE: 262.251.3800 FAX: 262.251.7067 • 800.329.8744 U.S.A. ONLY WEBSITE: 800.558.8744 U.S.A./CANADA 262.251.1907 INTERNATIONAL www.alto-shaam.com PRINTED IN U.S.A.
® HOT DISPLAY CASES U N PA C K I N G a n d S E T - U P O P E R AT I O N A L P R O C E D U R E S 1. I N S E R T W I R E S H E L V E S O R T I L E I N T O T H E D I S P L A Y The Alto-Shaam Display Case has been CASE (OPTIONAL). thoroughly tested, checked for calibration, and inspected to insure only the highest 2. C H E C K T H A T A L L B R E A K E R S W I T C H E S A R E I N T H E quality cabinet is provided. When you "ON" POSITION.
QUARTZ ELEMENTS CARE and CLEANING ➥ White cotton gloves should be worn when handling quartz The cleanliness and appearance of this unit will contribute considerably to operating efficiency and savory, appetizing food. Good equipment that is kept clean works better and lasts longer. THOROUGHLY CLEAN THE DISPLAY CASE DAILY 1. Turn lights and adjustable thermostat(s) to the “OFF” position. 2. Disconnect unit from power source by turning breaker switch(s) to the "OFF" position. 3.
S A N I TAT I O N G U I D E L I N E S Food flavor and aroma are usually so closely related that it is difficult, if not impossible, to separate them. There is also an important, inseparable relationship between cleanliness and food flavor. Cleanliness, top operating efficiency, and appearance of equipment contribute considerably to savory, appetizing foods. Good equipment that is kept clean, works better and lasts longer. Most food imparts its own particular aroma and many foods also absorb existing odors.
Side Dimensions for CC-48 • CC-72 • CC-96 CC-48 Control Side (rear view)) 19-5/8" (499mm) 20-3/8" (518mm) 30-5/16" (770mm) Access door for breaker switch Electrical Inlet 33-11/16" (855mm) Specifications Model CC-48 CC-72 CC-96 Interior 18 gauge non-magnetic stainless steel (Wire Grids are Optional) Six 150w halogen lamps 2 upper tier wire grids 2 lower tier wire grids Eight 150w halogen lamps 3 upper tier wire grids 3 lower tier wire grids Twelve 150w halogen lamps 4 upper tier wire grids
Service Parts List 12-22-00 Part Description Bumper extrusion mount Door Assembly INCLUDES: — Glass — Door, right-hand Glass Door, left-hand — Door Bumper DOES NOT INCLUDE: — Top Stop Track — Bottom Track — Side Jam — Side Bumper Heat Element End Glass Front Glass Label, lamp replacement Lamp Bulb Spacer Thermostat Top Guard Center Guard Quartz Heater 208V, 220 watt 240V, 220 watt 208V, 590 watt 240V, 590 watt 208V, 900 watt 240V, 900 watt Circuit Breaker 20 Amp (lamps) Circuit Breaker 30 Amp (
Top Guard Spacer with Screw Quartz Heater Center Guard Upper Tier Lower Tier Front Center Panel Front Bottom Panel 13860 Bumper Track Bumper Screw Model CC-96 Front and Side View #884 Operation & Care Manual • 6.
Outer Top Right End Panel End Glass Front Glass Latch, glass retaining Door Assembly Rear Block Panel Thermostat for Upper Heat Thermostat for Bottom Access door for breaker Thumb Screw Handle Glass Stiffener Switch Door Retainer Indicator Light Rear Block Access Panel Left End Panel Model CC-96 Rear and Side View #884 Operation & Care Manual • 7.
S E RVI C E VI EWS Unit Back Unit Front Circuit breaker Always disconnect the unit from the power source before cleaning or servicing. Light Switch Thermostat C O N T R O L PA N E L #884 Operation & Care Manual • 8.
S E RVI C E VI EWS Always disconnect the unit from the power source before cleaning or servicing. Quartz Heating Element Heating Element #884 Operation & Care Manual • 9.
#884 Operation & Care Manual • 10.
#884 Operation & Care Manual • 11.
#884 Operation & Care Manual • 12.
T R A N S P O RTAT I O N DAMAGE and CLAIMS L I M I T E D WA R R A N T Y All Alto-Shaam equipment is sold F.O.B. shipping point, and when accepted by the carrier, such shipments become the property of the consignee. Should damage occur in shipment, it is a matter between the carrier and the consignee. In such cases, the carrier is assumed to be responsible for the safe delivery of the merchandise, unless negligence can be established on the part of the shipper. Alto-Shaam, Inc.
