Datasheet

TECH INFORMATION
Mono channel (CH1)
Microphone Input: Electronically Balanced, Discrete Input Configuration
Frequency Response: 20Hz to 22kHz, +/-1dB
Distortion( THD&N): 0.005% At + 4dBu, 1kHz
Gain range: 0 dB to 44 dB (MIC)
Maximum Voltage Gain: 74 dB CH MIC INPUT→MAIN MIX OUT & TAPE OUT, 80 dB CH MIC
INPUT→CTRL ROOM & PHONES
SNR (Signal to Noise Rate): 110 dBu
Phantom power (Mic Pin2/Pin3 And Pin1): +15V to +18V
Line Input: Electronically Balanced(SW to LINE)
Frequency Response: 20Hz to 22kHz, +/-1dB
Distortion (THD&N): 0.005% At + 4dBu, 1kHz
Gain range: 15 dBu to 30 dBu
Stereo channels (CH2-5)
Line Input: Electronically Balanced(SW to LINE)
SNR (Signal to Noise Rate): 110 dBu
Frequency Response: 20Hz to 22kHz, +/-1dB
Distortion (THD&N): 0.005% At + 4dBu, 1kHz
Gain range: 0dBu
Maximum Voltage Gain: 30 dB CH LINE→MAIN MIX OUT
Impedance
Microphone Input: 3.9k Ohms
All Other Input: 10k Ohms or Greater
Tape Out: 1k Ohms
All Other Outputs: 120 Ohms
Equalization
Mono channel: High ±15 dB @12 kHz, Low ±15 dB @80 Hz
Crosstalk
Adjacent Input: -80 dB @ 1KHz (CH1-6)
Input to Output: -75 dB @ 1KHz (STEREO L/R,CH1-4,PAN:panned hard left or right)
Main Mix Section
Output level: 0dBu Unbalanced, 1/4" Jacks
Max out: +22dBu Unbalanced, 1/4" Jacks
Noise (Bus noise): -90dB @ 20Hz~22KHz (channel & MAIN level at 0dB,other at minimum,
DSP mute)
Power and Dims
Power Supply: 18V ~ 500mA
Rated Power Consumption: 9W
Physical Dimension (W/D/H): 128.1mm/204mm/38mm
Net Weight: 0.75kg
Dimensions (WxLxH): 128.1mm x 204mm x 38mm
Weight: 1.65 lb
Documents & Downlo