E AMERICAN-LINCOLN TECHNOLOGY 114RS SWEEPER Operator's Manual Beginning with Serial No. 350661 READ THIS BOOK! This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your machine could result in injury to you or to other personnel; damage to the machine or to other property could occur as well. you must have training in the operation of this machine before using it.
TABLE OF CONTENTS MACHINE DIMENSIONS ..................................................................................................................................... 1-3 MACHINE SPECIFICATIONS ............................................................................................................................... 1-4 STANDARD HARDWARE & TORQUE VALUES .................................................................................................. 1-6 DECIMAL-METRIC CONVERSION TABLE .............
TABLE OF CONTENTS TABLE OF CONTENTS - CHAPTER 2 ................................................................................................................. 2-1 MAIN BROOM ............................................................................................................................................ 2-2 SIDE BROOMS ......................................................................................................................................... 2-4 DOORS, FLAPS AND SEALS .............
MACHINE DIMENSIONS 56.6" 143.5 cm 47.0" 119.4 cm American-Lincoln Technology 114 RS Operator’s Manual 36.4" 92.
MACHINE SPECIFICATIONS GENERAL MACHINE SPECIFICATIONS SWEEPING PATH Width 45.0 inches 114.3 cm. Including side brooms TRAVEL SPEED Forward Reverse 4.0 MPH/4.9 KPH 2.0 MPH/2.48 KPH TURNING RADIUS Right Left U-turn Clearance 46.0 inches116.8 cm. 46.0 inches116.8 cm. 68.00 inches 172.7 cm. DIMENSIONS Length Width Height 56.6 inches143.5 cm. 36.4 inches 92.4 cm. 47.0 inches119.4 cm. WEIGHT Standard Machine With 228 A.H. Batteries With 330 A.H. Batteries 686 LBS .311 KGS (Without Batteries) 1071 LBS.
MACHINE SPECIFICATIONS SWEEPING SYSTEM SPECIFICATIONS MAIN BROOM Broom bristle mounted in a polycore tube with helical pattern bristle tufted in six double rows. Length 27.00 inches (68.6 cm) Broom Size 11.00 inches (27.9 cm) Dia. Broom bristle Length 3.00 inches (7.6 cm) long. (Usable to 1 Inch Length) SIDE BROOMS Polypropylene bristles mounted in a 1.25-inch (3.17-cm) thick marine grade varnished hardwood plate. Broom Size 16 inches (40.6 cm) Dia. HOPPER Equipped with dolly wheels and handle.
STANDARD HARDWARE & TORQUE VALUES SAE - Grade 8 SAE - Grade 5 Screw Size *6 *8 *10 *1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 Grade 5 Plated C 14 27 39 86 15 28 44 68 98 135 239 387 579 F 15 28 43 108 17 31 49 76 110 153 267 - Grade 8 Plated F C 130 151 22 24 40 44 63 70 95 108 138 155 191 216 338 378 545 818 - 410H Stainless C 18 33 47 114 19 34 55 85 - F 20 35 54 132 22 39 62 95 - Type F&T & BT Brass 5 9 13 32 6 10 16 - C 20 37 49 120 - F 23 41 64 156 - Type B, AB 21 34 49 120 - C = Coarse T
DECIMAL METRIC CONVERSION TABLE FRACTION DECIMAL MILLIMETER FRACTION DECIMAL MILLIMETER C-2001/9907 American-Lincoln Technology 114 RS Operator’s Manual 1-7
SAFETY PRECAUTIONS THE FOLLOWING STATEMENTS ARE USED THROUGHOUT THIS MANUAL AS INDICATED IN THEIR DESCRIPTIONS: DANGER To warn of immediate hazards which will result in severe personal injury or death. WARNING To warn of hazards or unsafe practices which could result in severe personal injury or death. CAUTION To warn of hazards or unsafe practices which could result in minor personal injury. ATTENTION To warn of unsafe practices which could result in extensive equipment damage.
SAFETY PRECAUTIONS WARNING Be careful when operating the machine on a ramp or incline. Always move slowly on a ramp. Do not turn this machine on a ramp. Do not stop and leave this machine on a ramp. WARNING Stop and leave this machine on a level surface. When you stop the machine, put the power switch in the “OFF” position and engage the Wheel Lock. WARNING To prevent injury, and damage to the machine, do not lift the machine or move it to an edge of a stair or loading dock.
MACHINE PREPARATION C0458 FIGURE 1 YOUR 114 RS BATTERY MACHINE HAS BEEN SHIPPED COMPLETE, BUT DO NOT ATTEMPT TO OPERATE WITHOUT READING THE FOLLOWING INSTRUCTIONS. Uncrate the machine and remove all packing material. Inspect the machine for possible shipping damage. Install brooms, as outlined in the Service Instructions Section of this manual. Install batteries as follows (if not included): 1. 2. 3. 4. 5. 6. 7. 8. 9. Turn the key to the “OFF” position.
MACHINE CONTROLS BATTERY CONDITION METER SIDE BROOMS LEVER DUST CONTROL SWITCH HOUR METER SIDE BROOMS SWITCH LIGHT SWITCH FILTER SHAKER SWITCH KEY SWITCH HORN BATTERY N CONDITIO DUST CON TROL ON WARNING IN COULD RESULT DAMAGE.
MACHINE CONTROLS NEUTRAL NEUTRAL FORWARD REVERSE P4066 FIGURE 3 FOOT PEDAL-See Figure 3 The accelerator and directional control foot pedal is located on the floor of the operator’s area. The accelerator and directional control pedal controls the machine direction, travel speed and dynamic braking. If the machine stops due to an electrical system overload in the power panel controller, allow the pedal to return to the neutral position. Reset is automatic when the controller cools.
MACHINE CONTROLS MAIN BROOM LIFT LEVER - See Figure 5 MAIN BROOM LIFT LEVER The main broom lift lever is located on the right side next to the driver’s seat. To lower the main broom, grasp the lever, move it to the left to clear the locking notch and pull back to the first or second notch. The first notch is the “Sweep” position, which is used for normal sweeping conditions, and will result in longer broom life. The second notch is the “Float” position and is used when sweeping very uneven surfaces.
OPERATING INSTRUCTIONS 1,2 6 3 114 RS 4 C0470 5 FIGURE 8 NOTE Before starting, perform the pre-start checks. PRE-START CHECKLIST - See Figure 8 1. Check controls for proper operation 2. Make sure all controls are in the “Off” position 3. Be sure accelerator / directional control pedal is in the neutral position. 4. Check all Dust flaps for damage or wear. 5. Check Main Broom and Side Broom for proper broom pattern. 6. Ensure that the hopper latch is properly engaged. TO START MACHINE 1.
OPERATING INSTRUCTIONS SIDE AISLES MAIN AISLE P4134/0001 P4134 SIDE AISLES FIGURE 9 HELPFUL HINTS FOR SWEEPING - See Figure 9 Here are some suggestions to keep in mind while sweeping. 1. Plan your sweeping in advance. Try to arrange long runs with minimum stopping and starting. 2. Pick up large debris before sweeping with the Machine. 3. Use the sweeper to sweep debris from side aisles into the main aisle. 4.
SERVICE CHART 5 8 7 2 BATTERY CONDITION ROL DUST CONT ON WARNING IN COULD RESULT DAMAGE.
SERVICE CHART For service assistance, consult your local Clarke/American-Lincoln Distributor. For best performance, replace worn parts with genuine Clarke/American-Lincoln parts. Refer all Maintenance and Service Requirements to Qualified Maintenance Personnel. Do not attempt to Service this Machine until you have read and understand all Safety Warnings associated with the equipment you are working with. WARNING Electrical repairs must be done by authorized personnel only.
SERVICE INSTRUCTIONS 2 4 1 C0477a 3 FIGURE 11 MAIN BROOM SERVICE INSTRUCTIONS TO CHECK THE MAIN BROOM SWEEP PATTERN Check the main broom sweep pattern after changing the broom or when poor sweeping performance is encountered while sweeping. 1. While the machine is not moving, lower the main broom to the SWEEP position and let machine sweep in one spot for a short period. 2.
SERVICE INSTRUCTIONS FLOOR CONTACT AREA FLOOR CONTACT AREA C0472 FIGURE 12 SIDE BROOMS SERVICE INSTRUCTIONS The Side Brooms Sweeping angle is not adjustable however the height of the side brooms can be adjusted to compensate for wear as the brooms become worn from use. Two access panels need to be removed to make the Side Broom Height adjustment. TO CHECK THE SIDE BROOM SWEEP PATTERN 1. Park the machine on a smooth level surface and turn the Side Broom Switch to the “ON” position. 2.
SERVICE INSTRUCTIONS DUST CONTROL SYSTEM SERVICE INSTRUCTIONS The Dust Control system consists of a Filter Baffle and a Panel Filter. The filter baffle is located under the dust control filter and should be checked/cleaned when the hopper is being emptied. The Panel Filter is located in the rear compartment behind the seat. WARNING Always park on a level surface, turn key off, and engage wheel lock before working on the machine to keep it from creeping or rolling.
SERVICE INSTRUCTIONS TO CHANGE THE PANEL FILTER - Cont. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Park the sweeper on a smooth level surface, Turn the key switch to the “OFF” position and engage the wheel lock. Disconnect the Battery Connector, which is located next to the seat. Raise the Battery compartment cover and engage the safety latch. Remove the rear cover. Locate and remove the four wing nuts that hold the filter manifold assembly in place over the filter.
SERVICE INSTRUCTIONS SAFETY LATCH BATTERY SERVICE INSTRUCTIONS TO CHARGE THE BATTERIES 1. Ensure Wheel Lock is engaged and key switch is “Off”. WARNING Turn Key Off Before removing Battery Connector. Disconnecting the Battery with the key switch on will produce sparks and Could cause an Explosion. WARNING Always wear eye protection and protective clothing when working near Batteries. WARNING C0471 FIGURE 14 Remove all Jewelry and do not lay tools etc. across the tops of Batteries.
CONNECTION DIAGRAM 25 9B 25B 25A 25C 9 CB-1. CB-4 CB-5 16B CB-8 CB-7. OPTION 15A 21 16C 17A H-SW. 17 16D 26 20 9B 16C I 7L SM-SW. 15 15A 16A 7G L-SW. 25 K-SW. 1 17A 16B 7M HM A B SB-SW. 7L 7H 19 CM WSB-SW. POT 10 26 HORN 12 7M 11 BLK. AFTER TERMINATING CONNECTORS "C" & "D", TAPE WITH 1&1/2 WRAPS OF ELECTRICAL TAPE. 7H MTR.. RED 22 RT. SIDE BROOM. 15 12 11 10 9 CON. A F E D C B 15 12 11 10 9 A 1 7G 17 22 21 20 19 16A CON. C CON.
SCHEMATIC DIAGRAM 36V BATTERY BANK CC CC 1A 1B 1C CB-2 20A 1B MAIN BROOM 8 6 2A CB-3 25A 1,1A MTR. A2 5A 5 VACUUM MTR. 3A 7E A1 7K D5 CB-6 35A 1C 7 2 9 9 4 20A. DRIVE. 7A,7B 1A. 14 BLK. D1. 11 1 2 10 5 MTR. 1 M1 9A Note: 9A jumper is NOT USED with seat switch option M2 6 12 EMERG. STOP 1 1203A CONTROLLER BB+ MTR. 13 2 4 3 WHT. 1A CB-1 10A. 9B 7,7A 3 3 3 P1 2 1 Seat Sw Option 20A 25 KEY SWITCH 5 21A LOW BATTERY SHUT DOWN OPTION TD-1.
HARDWARE ABBREVIATIONS ABBREVIATIONS - SCREWS ADJ ADJ.SP BHM BHS CAPT.SL CAPT.WG FHM FIL.
ORDERING PARTS Parts may be ordered from American-Lincoln authorized distributors. Record the information from the American-Lincoln serial number plate to avoid delays in filling your order. MODEL NO. SERIAL NO. Manufactured By A AMERICAN LINCOLN TECHNOLOGY ® BOWLING GREEN, OHIO 1. Use the model number, catalog number, and serial number when ordering. 2. Give the part number, description, and quality of parts needed. 3. Give shipping instructions for either freight, UPS, or parcel post.
TABLE OF CONTENTS - CHAPTER 2 Main Broom ............................................................................................................................................ 2-2 Side Brooms and Deflector ...................................................................................................................... 2-4 Doors, Flaps, & Seals .............................................................................................................................
MAIN BROOM - PARTS LIST KEY NO. PART NUMBER DESCRIPTION 1 2 3 4 5 6 7 8 9 10 7-39-00026 8-03-04296 8-81-00166 8-33-09059 2-10-01336 8-41-05076 8-39-00003 8-33-09062 8-70-05291 8-15-01002 Knob L.H.
MAIN BROOM - EXPLODED VIEW H65 H146 7 H295 H294 4 H293 H295 H61 2 8 10 H290 9 6 H145 OM RO H291 B AIN 3 M H146 11 H237 H95 12 5 H62 H53 H296 18 16 H291 American-Lincoln Technology 114 RS Operator’s Manual 15 H295 H72 H298 H54 H146 H289 14 H146 H15 H292 H290 H171 20 19 H142 13 H63 C0449/9811 H120 H237 H69 H171 H225 H94H112 H44 1 H299 17 H297 21 H289 2-3
SIDE BROOMS AND DEFLECTOR- PARTS LIST KEY NO.
SIDE BROOMS AND DEFLECTOR- EXPLODED VIEW H26 H27 H15 H27H72 H25H72 13 H17 H65 2 H52 H38 3 H15 H136 H25 9 10 15 5 4 H57 H22 5 1 8 12 BLACK WIRE RED WIRE H15 H72 H27 H204 H72 H25 11 H17 H27 14 H26 H45 H44 H11 H10 H17 16 H57 H120 6 H7 17 2 4 18 14 7 13 1 8 11 12 BLACK WIRE RED WIRE H53 H48 14 H27 H72 19 20 H25 H115 H65 21 C0457/0201 H10 American-Lincoln Technology 114 RS Operator’s Manual H11 20 H12 VIEW SHOWING LOCATION OF TY-WRAP 2-5
DOORS, FLAPS & SEALS - PARTS LIST KEY NO. PART NUMBER DESCRIPTION QTY 1 2 3 4 5 8-19-08056 8-13-07110 8-13-07108 8-25-08191 8-68-05072 Door, R.H. Clamp, R.H. Front Clamp, R.H. Rear Flap, Right Side Seal, Side Hopper 1 1 1 1 2 6 7 8 9 10 8-25-08190 8-13-07107 8-29-00226 8-25-08186 8-31-07010 Flap, Rear Outer Clamp Seal, Center Hopper Flap, Rear Inner Hanger, Rear Flap 1 4 1 1 1 11 12 13 14 15 8-29-00224 8-29-00225 8-19-08057 8-25-08187 8-41-00044 Seal, Door Upper Seal, Door Lower Door, L.H.
DOORS, FLAPS & SEALS - EXPLODED VIEW 25 8 16 H136 17 9 14 15 13 21 19 12 H25 H72 10 25 11 6 H25 H72 H25 H72 5 H136 7 H136 25 7 H136 20 5 24 H15-H72 4 23 3 2 C0456/9811 American-Lincoln Technology 114 RS Operator’s Manual 22 1 H15-H72 2-7
SIDE COVER & BATTERY PAN 4 2 5 4 6 1 3 C455a/9811 KEY NO.
HOPPER 2 1 H44 H45 H65 4 3 H65 C0450B-9811 5 KEY NO. 1 2 3 4 5 4 H150 PART NUMBER DESCRIPTION QTY 8-32-06101 8-31-06082 8-70-05290 8-89-08066 8-41-00060 Hopper Handle Axle Wheel Latch 1 1 1 2 1 Nut, Hex. 5/16-18 x .500 x .265 Lock Washer, 5/16 HS Med. Nut, 1/2-13 Fiber Lock Screw, 5/16-18 x 1.
FORWARD/REVERSE PEDAL - PARTS LIST KEY NO. PART NUMBER DESCRIPTION QTY 1 2 3 4 5 8-08-00764 8-55-00032 7-08-00592 8-16-00025 0875-113 Bracket, Pedal Mounting Pedal, Forward/Reverse Bracket, Pedal Mounting (Black) Centering Device Potentiometer 1 1 2 1 1 6 7 8 9 10 7-03-04137 8-14-01006 8-42-05135 2-95-01999 7-66-00147 Potentiometer Lever Arm Clevis Interconnecting Rod Nut, 1/4-28 Interconnecting Rod 1 2 1 2 1 Screw, 1/4-20 x .750 HHC Nut, Hex 1/4-20 x .437 x .218 Washer, .625 x .281 x .
FORWARD/REVERSE PEDAL - EXPLODED VIEW 9 H300 H40 H34 8 7 H44 10 2 H44 1 H15 H45 H52 H52 3 H72 3 H25 H300 5 H27 C0453/9812 7 9 4 5 H232 H15 H72 H25 H79 6 H27 American-Lincoln Technology 114 RS Operator’s Manual 2-11
CONSOLE ASSEMBLY - PARTS LIST KEY NO. PART NUMBER DESCRIPTION QTY 1 2 3 4 5 8-33-05149 8-52-00166 8-52-00165 8-41-05078 7-31-06065 Console Instrument Panel (R.H.) Instrument Panel (L.H.) Lift Arm Cover 1 1 1 1 1 6 7 8 9 10 2-95-04689 8-10-00036 7-60-00160 7-09-01057 0895-108 Flat Washer Cable Pulley Spacer Wire Harness, Instrument Panel 2 2 1 1 1 11 7-13-07130 Bracket - Cable Clamp 1 Nut, 1/4-20 Insert Fiber Screw, 5/16 - x 1.500 HHC Flat Washer, .687 x .343 x .062 Lock Washer, 5/16 HS Med.
CONSOLE ASSEMBLY - EXPLODED VIEW 5 4 H95 H46 H43 H26 9 H64 7 6 3 H244 11 H93 2 H43 H150 H52 H126 H46 9 10 H43 H38 1 8 H52 H149 6 H51 FRAME H44 C0460/9811 American-Lincoln Technology 114 RS Operator’s Manual H151 2-13
FILTER SYSTEM - PARTS LIST KEY NO.
FILTER SYSTEM - EXPLODED VIEW 8 13 7 20 19 H72 H15 H26 H44 9 10 H287 6 H151 16 H87 15 H46 11 14 H288H44 3 5 12 4 H86 1 H27H26 2 12 FRAME LOCTITE ALL SET SCREWS MOTOR FACE SHAKER PLATE PIVOT .75 .12 SHAKER MOTOR AND WEIGHT INSTALLATION C0452/9811 4.25 .
DRIVE COMPARTMENT & SEAT - PARTS LIST KEY NO. PART NUMBER DESCRIPTION 1 2 3 4 5 8-52-00161 8-32-00045 8-52-00159 8-69-00022 7-72-05005 Drive Compartment Hinge Seat Base Seat Slide Adjuster Kit 1 1 1 1 1 6 7 8 9 10 7-03-04114 7-50-05151 8-21-04050 8-68-05072 Bar, Seat Lock Seal Edging, Seat Panel Seal 1 2 1 1 7-82-00037 8-08-00763 8-50-00014 Switch, Broom Bracket, Broom Switch Serial Plate 1 1 2-00-04115 Rivet 2 Screw, #10-24 x .50 RHM Screw, 5/16-18 x .750 HHC Screw, ¼ - 20 .
DRIVE COMPARTMENT & SEAT - EXPLODED VIEW 4 9 10 5 H27 8 3 H46 H15 11 H25 H72 H25 2 12 7 H26 15 H25 H72 H27 H44 H6 H12-H9 H93 H43 1 H10-H11 H93 American-Lincoln Technology 114 RS Operator’s Manual 13 H15 H27 H93 C0454/0903 H72 2-17
STEERING & DRIVE - PARTS LIST KEY NO.
STEERING & DRIVE - EXPLODED VIEW FRAME 10 H238 5 20 16 11 H244 H197 9 H178 H44 H79 H204 H17 4 H44-H84 17 H54 H43-H44-H38 H72-H25 5 H253 H254-H53-H52 H26 H20 H54 8 6 12 FRAME 7 C0448/9811 American-Lincoln Technology 114 RS Operator’s Manual 3 H178-H44 H43 13 14 15 H129-H119 18 2 19 1 H230-H136 H230-H136 2-19
WHEEL LOCK - PARTS LIST KEY NO. PART NUMBER DESCRIPTION QTY 1 2 3 4 5 8-55-08130 8-08-00771 8-10-00035 7-76-00102 8-03-09024 Wheel Lock Rod Bracket Cable Spring Axle 2 1 1 2 2 6 7 8 9 10 8-75-01196 8-33-09087 2-95-04689 0797-041 7-09-01057 Spacer Hub Assembly Flat Washer Wheel Assembly (Ultraseal) Bushing 2 2 2 2 2 11 12 13 14 15 8-41-05080 7-39-00017 2-00-05394 2-00-05226 2-00-05024 Lever Wheel Lock Knob Clamp Bearing Washer 1 1 2 4 4 16 8-25-06011 Flange Rim 2 Screw, 1/4-20 x 1.
WHEEL LOCK - EXPLODED VIEW H46 H17 H27 12 10 H95 H17 DRIVER COMPARTMENT H43 H27 H38 H26 3 FRAME PART 8 13 H72 H25 9 15 11 H282 14 H53 FRAME PARTS 14 H285 H286 5 H284 H20 3 H283 2 H48 H34 16 H286 H44 6 INSIDE C0447/9811 7 15 1 4 1 H25 H26 4 American-Lincoln Technology 114 RS Operator’s Manual 2-21
POWER PANEL - PARTS LIST KEY NO.
POWER PANEL - EXPLODED VIEW H26 12 H27 3 6 13 H15 8 5 H8 14 H233 14 1 15 4 H9H12 H25 H72H27 9 H6 H43H44 H34 H126 H10 16 ON (+) TERMINAL ONLY 10 2 18 H10 H11 19 H15 17 7 H43H44 H34 FRAME H15 H165 H165 C0451-9811 American-Lincoln Technology 114 RS Operator’s Manual 2-23
INSTRUMENT PANEL - PARTS LIST KEY NO.
INSTRUMENT PANEL - EXPLODED VIEW C0463/9811 American-Lincoln Technology 114 RS Operator’s Manual 2-25
DECALS - PARTS LIST KEY NO.
DECALS - EXPLODED VIEW 3 8 5 13 10 2 12 21 14 15 11 6 9 22 7 1 4 18 17 16 20 C0476a/1003 23 American-Lincoln Technology 114 RS Operator’s Manual 19 2-27
TABLE OF CONTENTS - CHAPTER 3 Back-up Alarm ........................................................................................................................................ 3-2 Battery Option ......................................................................................................................................... 3-4 Broom Option .........................................................................................................................................
BACK-UP ALARM - PARTS LIST OPTION 0880-580 KEY NO. PART NUMBER DESCRIPTION QTY 1 2 3 4 5 8-75-01120 7-82-00023 8-32-09009 8-64-00007 8-11-00044 Spacer Switch Back-Up Alarm Circuit Breaker, 10 amp Boot 2 1 1 1 1 6 7 8 9 10 2-00-03418 2-00-04479 3-61-00193 2-00-04626 2-00-04578 Terminal Connector, 3-Way Wire, 16 ga. Red Terminal, Female Bullet Terminal, Male Bullet 1 1 6' 2 2 11 12 13 14 15 3-61-00189 2-00-04282 2-00-04345 2-00-04742 2-00-00221 Wire, 16 ga.
BACK-UP ALARM - EXPLODED VIEW 21 20 15 4 5 3 1 18 22 2 17 16 RED WIRE 10 19 9 6 CB-8 7* 11 14 12 8 25 C *NOTE: USED ONLY WITH STROBE OPTION TB-2 NEG.
BATTERY OPTIONS 4 2 5 4 6 1 3 C455a/9811 KEY NO. 1 1 3 4 5 PART NUMBER DESCRIPTION 0875-105 0875-106 0875-102 7-90-07286 7-75-01142 Battery (12 Volt) Battery (12 Volt Dry) Connector Assembly Battery Connectors Battery Spacer QTY 3 1 2 1 C455a/9811 1 3 2 KEY NO.
BROOM OPTIONS 1 2 C0486 KEY NO.
HEAD & TAILLIGHT OPTION EXISTING KEY SW. ( BACK VIEW) RT. INST. PANEL LT. INST. PANEL BAT.. ST. IGN.. 12 8 1 7 9 15 DISCONNECT IN THIS AREA TO REMOVE POWER PANEL COVER 13 EXISTING TB-2 (-) DRILL CP MARKS TO .281 (8) PLACES 4 10 FRONT BUMPER AD HE T . T L GH LI 12 13 9 AD E .H RT GHT LI 11 9 6 IL .TA RT GHT LI 5 3 2 12 13 4 5 6 NOTE: ROUTE WIRE & TIE TO EXISTING HARNESS USING TYE RAPS ITEM #14 IL TA LT. GHT LI POWER PANEL COVER C0482 OPTION 0880-581 KEY NO.
STROBE LIGHT W/O OHG 1 2 5 4 3 10 9 6 12 TB-2 NEG. - 11 20 25C 7 8 CB-8 14 * * NOTE: USED ONLY WITH BACK-UP ALARM 18 17 C0481 KEY NO. PART NUMBER DESCRIPTION 1 2 3 4 5 8-64-00007 8-11-00044 8-81-00169 2-00-00491 8-40-05036 8-40-05020 Circuit Breaker, 10 Amp Boot Support, Warning Light Grommet Strobe Light, Amber (OPTION 0880-582) Strobe Light, Red (OPTION 0880-585) 1 1 1 1 1 Ref. 6 7 8 9 10 3-61-02014 2-00-03418 3-61-00193 2-00-04626 2-00-04578 Black Loom Connector Wire, 16 ga.
OVERHEAD GUARD OPTION 7 2 3 9 8 1 6 4 5 C-0560/9802 OPTION 0880-587 KEY NO. PART NUMBER DESCRIPTION QTY 1 2 3 4 5 8-30-05162 8-30-05161 8-30-05174 2-00-05134 2-95-04182 Leg, L.H. Lg, R.H. Overhead Guard Top Weld Plug Button Fiber Nut 1 1 1 6 6 6 7 8 9 2-00-00233 2-00-00402 2-00-02312 2-00-00240 Screw, 3/8-16 x 1.000 HHC Flat Washer, .750 x .390 x .094 Lock Washer, 1/2 HS Med. Screw, 1/2-13 x 1.
STROBE LIGHT W/OVERHEAD GUARD 6 13 14 15 7 10 4 3 8 9 1 11 5 2 C-0561/9802 KEY NO. PART NUMBER DESCRIPTION QTY 1 2 3 4 5 2-00-04282 3-61-00189 2-00-04578 2-00-04626 3-61-00193 Terminal Wire, #16 AWG. (Black) Terminal, Male Bullet Terminal, Female Bullet Wire, #16 AWG.
LOW BATTERY SHUTDOWN OPTION 15 14 8 RED (NC) (C) (NO) RED 1 9 RED BLK 15 16 7 13 6 2 5 10 7L 16A BLK CM16B HM 16C 16D 9 RED LT. INST. PANEL 4 12 8 3 KEY NO. PART NUMBER RT. INST.
EMERGENCY STOP OPTION 18 EXISTING SOL. 3A + ROUTE ALL WIRING & TIE TO EXISTING HARNESS USING TYE RAPS ITEM 14 REMOVE WIRES 9B & 25 FROM KEY SWITCH, CUT OFF TERMINALS STRIP AND ADD ITEM #6 RT. INST. PANEL 3 DECAL 1 16 11 17 15 8 (+) TB-1 9 7 EXISTING HARNESS ST. 4 POWER PANEL WIRE 1D 2 EXISTING KEY SW. ( BACK VIEW) IGN.. 5 9B 25 3 9 2 6 WIRE 39 WIRE 9B 3 SOL. 20A SOL. 21A WIRE 25 WIRE 40 WIRE 36 12 10 EMERG. STOP SW.
VAC WAND OPTION - PARTS LIST OPTION 0880-621 KEY NO.
VAC WAND OPTION - EXPLODED VIEW 15 2 14 13 3 43 12 44 4 11 7 45 37 9 42 37 18 38 10 19 36 5 20 25 39 17 26 22 16 1 21 41 40 24 NOTE: DECAL LOGOS ARE CENTERED ON PANEL 23 6 31 27 (-) POST TB-1 28 (+) POST TB-1 VAC.
SEAT SAFETY SWITCH - PARTS LIST OPTION 0880-669 KEY NO. PART NUMBER DESCRIPTION QTY 1 2 0875-126 2-00-04531 Wire Assy., Seat Switch Terminal, .25 Fisco Male 1 1 3 4 2-00-04536 0882-069 Terminal, .
SEAT SAFETY SWITCH - EXPLODED VIEW C0986/0903 American-Lincoln Technology 114 RS Operator’s Manual 3-15
DRIVE MOTOR SERVICE PARTS 1 2 2 3 4 8 6 7 5 C0488/9802 KEY NO.
SPARE PARTS LIST SPARE PARTS PACKAGE- 0880-590 KEY NO.
INDEX AMBER STROBE LIGHT OPTION ........................................................................................................... 3-8 BACK-UP ALARM OPTION ..................................................................................................................... 3-2 BATTERIES, TO REMOVE THE .............................................................................................................. 1-23 BATTERIES , TO CHARGE THE ..........................................................
INDEX MAIN BROOM SWEEP PATTERN, TO CHECK THE .............................................................................. 1-19 MAIN BROOM, TO CHANGE THE .......................................................................................................... 1-19 MAIN BROOM, TO ADJUST THE SWEEP HEIGHT ................................................................................ 1-19 OPERATING INSTRUCTIONS .................................................................................................
AMERICAN-LINCOLN TECHNOLOGY RIDER SWEEPER / SCRUBBER "BUMPER-TO-BUMPER" LIMITED WARRANTY I. COVERAGE A.