Installation manual

1. When electric supply is connected the ‘Run’ power
light will be on and the display panel will display
the current water temperature. ie.10 H = 10°C.
2. On/OFF button to turn heater on and off - see
page 10.
3. The ‘set’ button is used to set the F1-5 functions
ie.water temperature, defrosting cycle and
defrosting time etc. see page 10-11
PLEASE READ THE CONTROL
FUNCTIONS CAREFULLY AND MAKE THE
NECESSARY ADJUSTMENTS BEFORE
USING YOUR HEATER
9
CONTROL PANEL FUNCTIONS
1
3
10 40
H
2