Installation manual

When the SET button is pressed for the fourth time, the display panel will
display:-
F4 : Operation Mode.
F4 C : Cooling Mode.
F4 H : Heating Mode
When the SET button is pressed for the fifth time, the display panel will
display:-
F5 : The defrosting temperature of the evaporator pipe. The
recommended temperature should be set to -5°C. To adjust setting YOU
MUST PRESS THE ON/OFF BUTTON FIRST. The temperature can be
adjusted using the UP and DOWN buttons between -10°C~ 0°C
Press on/off button again to take you back to the normal display.
11
CONTROL PANEL FUNCTIONS 4-5