User`s manual

10
When you go to graphic equalizer, the PC will display above picture. You can adjust each band's gain value, if this
unit is in LINK function, the change on channel A will be applied to channel B also. The adjustable range goes
from 12dB to +12dB.
When you go to parameter equalizer, the PC will display above picture, you can adjust the frequency, gain,
and bandwidth according to the application. If this unit is in LINK function, the change on channel A will be
applied to channel B also. What's more, there are some small squares in the frequency contour, you can use
these squares to adjust frequency, bandwidth and gain to achieve fast-start.
Note: when you choose parameter equalizer, sometimes the frequency value displayed on the front maybe
not the real value.
7.3 Upload or Download
You can use UPLOAD from FILE menu to upload all saved user presets (30-99) from DIGAN2.14 unit to your computer.
DOWNLOAD from FILE menu will download all saved user presets in your computer to DIGAN2.14 unit.
7.4 Update system
If the version of DIGAN Editor program is different from that in DIGAN2.14 unit, the window will show error to ask
you to update your system in DIGAN2.14 unit, or your DIGAN2.14 can't be recognized by your computer. To
update your system in DIGAN2.14, do the following:
a. Turn on DIGAN2.14 while it is not connected with PC, then press 16k of channel B and BYPASS key at the
same time to enter Update mode.
b. Now connect DIGAN2.14 to PC and run DIGAN Editor software, the window will ask whether you are sure to
update your system, press OK to start.
c. If you have selected a wrong model (for example DIGAN2.30), you have to reselect the right model. If the updating
process is terminated abnormally, please restart your updating from the beginning.
d. While this update is finished, firstly, disconnect the main power, and then connect to the main power again to
restart your DIGAN2.14 unit.