User`s manual

These 1/4" phone sockets are used to send out the signal from the AUX Bus to external devices such as effects.
- AUX SENDS
56
Use these stereo 1/4" phone sockets to return the sound of an effect unit to the Main Mix.
You can also use them as an extra auxiliary input.
- AUX RETURNS
57
AUX RETURNS
43
AUX SENDS
4
LL
SUBGROUPS OUT
3
2
4
1
3
RR
1
2
LL
1
2
RR
DIRECT OUTS (BAL/UNBAL)
CH1
CH2
CH3CH4
43
2
1
SUBGROUPS INSERT
- DIRECT OUTS
58
These 1/4" phone sockets are used to connect the inputs of deck or secondary in a complicated PA live sound
system. You will find it is the best tool when you operate the SUBGROUPS OUT.
- SUBGROUPS OUT
59
- SUBGROUPS INSERT
60
56
57
58
59
60
17
Each MONO MIC/LINE channel (CH1-CH4) is equipped the 1/4" phone socket for direct output. These jacks
are used to send the signal from the channel path to external device for recording function etc..
These 1/4" phone sockets are insert points. They are used to connect processors such as compressor, limiter,
EQ etc.. When insert external processor into these jacks, the subgroup stereo signal will be taken out, then
returned to before subgroups fader. Of course, these jacks used must be stereo (Tip Send/Ring Return).