User`s manual

8
RIGHT
LINE IN
LINE IN
(MONO)
LEFT
BAL/UNBAL
12
3
MIC10
INSERT
BAL/UNBAL
LINE IN
12
3
MIC 1
SPOTLIGHT
4. CONTROL ELEMENTS
1 MONO MIC/LINE Channels
Your LYNX-MIX124 USB is equipped with
4 (8 for LYNX-MIX164 USB, 12 for LYNX-
MIX204 USB,16 for )
low-noise microphone preamplifier with
optional phantom power, 50 dB of Gain
and over 115 dB of S/N ratio. You can
connect almost any type of microphone.
Dynamic microphones do not need
phantom power. Use phantom power only
with condenser microphones but make
sure that the phantom power button is
disengaged before connecting the
microphone. Phantom power will not
damage your dynamic microphones, so
make sure to read the MIC instructions
manual before engaging phantom power.
Use switch (48) to activate/deactivate
phantom power. These channels are also
equipped with 1/4" TRS balanced/unbala
nced LINE-IN plugs to connect line-level
instruments such as keyboards, drum
machines and effect devices.
LYNX-MIX244 USB
1
These are channels 5 through 12 (9 through 16 for LYNX-MIX164 USB, 13
through 20 for LYNX-MIX204 USB,17 ).
They are organised in stereo pair and provided with XLR sockets (channels
5/6 for LYNX-MIX124 USB, 9/10 for LYNX-MIX164 USB, 13/14 for LYNX-
MIX204 USB) and 1/4" TRS phone jacks.If you connect only the left jack, the
input will operate in mono mode, that is the mono signal will appear on both
input channels. You can use these inputs with a stereo keyboard, drum
machine, etc.
through 24 for LYNX-MIX244 USB
2 STEREO INPUTS
3
This is where you connect external sound processors such as compressor-
limiter, equalizers, etc.. The insert point is available on the first 4 (8 for
LYNX-MIX164 USB, 12 for LYNX-MIX204 USB, ) MIC
channels only.
16 for LYNX-MIX244 USB
3 MONO Channel INSERT
4 TRIM
The TRIM control is applied in the mono MIC and stereo input channels. It
provides with 2 different indications: One is for the MIC and the other for
LINE levels. When you use a microphone, you shall read the MIC ring (0~50
for mono MIC input, 0~40 for stereo channels); when you use a line level
2