User`s manual

24
Power Supply
Europe 210-240 VAC~ 50 Hz
Main Voltage
USA/Canada 100-120 VAC~60 Hz
U.K./Australia
240 VAC~ 50 Hz
40 Watts
Power Consumption
LYNX- 124 USBMIX
LYNX- USBMIX164
50 Watts
Line Input
Balanced/Unbalanced
Distortion (THD & N)
0.005% at +4 dBu, 1 kHz
Microphone Input
Electronically balanced, discrete input configuration
0.005% at + 4 dBu, 1 kHz
115 dB
SNR (Signal to Noise Ratio)
10 Hz to 55 kHz, +/-3 dB
Frequency Response
Sensitivity Range
+15 dBu to -35 dBu
All Other Output
120 Ohm
All Other Inputs
10 kOhm or greater
Low-shelving
+/-15 dB @ 80 Hz
Hi-shelving
+/-15 dB @12 kHz
8. TECHNICAL SPECIFICATION
Mono Input Channels
Frequency Response
10 Hz to 55 kHz, +/-3 dB
Distortion (THD & N)
Gain Range
0 dB to 50 dB (MIC)
Electronically balanced
Line Input
Distortion (THD & N)
0.005% at +4 dBu, 1 kHz
Stereo Input Channels
Frequency
R
esponse
10 Hz to 55 kHz,
+
/-3 dB
Impedances
Microphone Input
1.4 kOhm
Channel Insert Return
2.5 kOhm
Tape Out
1 kOhm
Equalization
Hi-Mid (Stereo)
+/-15 dB@3kHz
Mid bell (Mono)
+/-15 dB -frequency range 100 Hz~8 kHz
Mid-Low (Stereo)
+/-15 dB @ 500 Hz
Low Cut Filter
75 Hz, 18 dB/Oct.
+22 dBu Balanced XLR
DSP Section
Presets
256
16-Position VARIATION Selector
Main Mix Section
A/D & D/A Converters 24-Bit
DSP Resolution
24-Bit
Mono & Stereo DELAY (Max DELAY TIME 650ms)
REVERB+DELAY, REVERB+CHORUS,
Type of Effects
Hall, Room, Vocal & Plate REVERBS
Chorus, Flanger & Reverb MODULATIONS
REVERB+FLANGER Combinations
Controls
16-Position PRESET Selector
DSP MUTE SWITCH with PEAK LED Indicator
Noise (Bus Noise)
Fader 0 dB, all input channels assigned and set to
Fader 0 dB, Channels Muted: -100 dBr (ref.: +4 dBu)
UNITY Gain: 90 dBr (ref.:+4 dBu)
Max Output
AUX Returns Gain Range
- to +15 dB
+22 dBu Unbalanced, 1/4" jacks
+22 dBu
AUX Sends Max Out
LYNX- USBMIX204
LYNX- USBMIX244
60 Watts
70 Watts