User`s manual

6
This is the fastest way to get something out from your LYNX-MIX USB , if you
have a keyboard and a microphone.
series
a. Plug the microphone into Channel 1 MIC IN.
b. Turn down AUX and LEVEL controls on the input channel.
c. Put the EQ controls on center position.
d. Turn on your LYNX-MIX USB mixer.
f. If you like, you can adjust the EQ at this stage.
g.
The LED on the Master LED meter should flash only occasionally, otherwise
you will hear distortion. If this LED is not active and you still hear distortion,
please turn down a little the input LEVEL control or reduce the output level
of your source instrument.
h.
Connect your stereo keyboard into one of the s channel of yourtereo line inputs
LYNX-MIX USB mixer.
Here you are. It is your first GIG with your LYNX-MIX USB series.
3. QUICK START
Sing or speak into the microphone with normal volume and adjust the channel
LEVEL control to half.
e.