Specifications

11BAppendices
12 Appendices
12.1 I/O Configuration Jumpers
I/O Port A and I/O Port B can be configured to
support two different I/O routing modes. The
routing mode is selected by the position of two
8-position I/O Configuration Jumpers on headers
JP5 and JP6. The mode selected must be
compatible with the AES16 breakout cable being
used.
Header
LStream
Port
Header
CLOCK IN
Port
Header
CLOCK OUT
Port
A E S 1 6
I/O PORT A
I/O PORT B
LSTR EAM
I/O Port A
I/O Port B
I/O Configuration Jumpers JP5 and JP6
For connections to equipment with D25 connectors supporting four
AES/EBU inputs and outputs, both of the I/O Configuration Jumpers
should be set to the 4/4 CHNL position on JP5 and JP6 as shown at
left. This is the factory default position and is the position required for
the CBL-AES1604 and CBL-AES1605 cables.
AES16 User Manual 73