User`s manual

USER’S MANUAL
Kaleido-ALTO/QUAD | 17
Disable Actions opens the Action Settings window, showing the Actions Enabled checkbox. Unchecking
this box disables all actions on the Kaleido ALTO/QUAD. This is of most use when a sequence of actions
is inadvertently triggered that enters a loop. The only way to get out of the loop is to disable actions using
this panel, and then examine the sequence of actions and eliminate the problem.
Figure 4.19 Action Settings panel
Mouse Configuration sets the time duration since the last mouse movement after which the mouse cursor
will become invisible on the screen. The cursor will immediately become visible again if the mouse is
moved.
Figure 4.20 Mouse configuration panel
Options opens a window that allows the user to activate the Embedded Audio option on the Kaleido
ALTO/QUAD. If you wish to purchase this option, contact your sales representative. Once the option is
purchased, you will be sent a key that is exclusive to your Kaleido (i.e. based on the serial number). Enter
the key in the Embedded Audio data box, and click the Validate button in the lower right of the window.
Once the key is validated, the Validate button will be replaced by a Save button. Click it to store the valid
key information in the system. The option is now activated.
Figure 4.21 Network configuration panel
5 Controlling Kaleido-Alto/Quad Using the Kaleido-RCP or a
Keyboard
The Kaleido-Alto/Quad may be controlled in operation using either the Kaleido-RCP remote control panel,
or a standard computer keyboard plugged into its rear panel. The Kaleido-RCP may be located far away
from the Kaleido-Alto/Quad itself, and has a keyboard designed to access Kaleido-Alto/Quad functions,