User`s manual

USER’S MANUAL
20 | Kaleido-ALTO/QUAD
Key Kaleido RCP equivalent
Esc: Escape
Tab: Select
Enter: Enter
CTRL+A: Input
CTRL+F: Full Screen
CTRL+R: Aspect Ratio
CTRL+U: Underscan
CTRL+W: Audio Mon
CTRL+Y: Status
Arrow keys: Arrow buttons
Function keys: Layout Presets buttons
Figure 5.2 Keyboard key assignments for Kaleido operation
5.3 Kaleido-RCP operation in detail
Using the Kaleido-RCP to operate the Kaleido-Alto/Quad is similar to using the mouse. The same menu
and windows appear for all the features; refer to section 3.3 for a specific description of all the features.
5.3.1 Accessing a single Kaleido-Alto/Quad using the Kaleido-RCP
To access a single Kaleido-Alto/Quad in a daisy-chain of several units, follow these steps:
1- Push the Device button on the Kaleido-RCP. The Device button lights up brightly (and the current
layout button if applicable) and all alphanumeric buttons light up as the unit awaits an ID number
entry. At the same time, on all display devices, the ID number of the associated Kaleido-Alto/Quad
unit appears at the bottom of the screen.
2- Push the alphanumeric buttons corresponding to the ID number of the desired Kaleido-Alto/Quad
unit. The frame is selected and the available control buttons at the Kaleido-RCP are illuminated.
Once a Kaleido frame is selected, any actions taken at the Kaleido-RCP apply only to that Kaleido-
Alto/Quad.
5.3.2 Accessing all Kaleido-Alto/Quad units using the Kaleido-RCP
To access all Kaleido-Alto/Quads in a daisy-chain of several units:
Push the All Devices button; on the Kaleido-RCP, the All Devices button lights up brightly while all
other buttons are dimly lit (note that if the same Preset Layout is currently being displayed on all
Kaleido-Alto/Quads, its corresponding button will light up brightly as well). At the same time, on all
Kaleido-Alto/Quad outputs, the ID number of the associated Kaleido-Alto/Quad unit appears at the
bottom of the screen.