User`s manual

USER’S MANUAL
Kaleido-ALTO/QUAD | 31
Two new fields will appear: in the “Host address” field enter the IP address of your Kaleido-Alto/Quad,
and in the “Port number” field enter “13000”. This indicates that connection to the Kaleido-Alto/Quad will
be established via the port 13000. Click on the “OK” button.
To be able to see the typed characters:
Select “Properties” from the “File” menu, the “Properties” dialog box appears.
Go to the “Settings” tab, click on the “ASCII Setup…” button located at the bottom of the dialog.
Select “Echo typed characters locally”.
Click on the “OK” button and click again on the “OK” button from the “Properties” dialog.
The typed characters will appear in the console.
Commands can be sent to the Kaleido-Alto/Quad while a session is open. There is no maximum number
of commands that can be sent in a session, and it is recommended to keep a session open as long as
there are commands to send, since opening a session takes a few seconds. Here is a simplified example
of a session:
Open a session
send command
send command
…
send command
Close the session.
To open a session enter the openID command using the IP address of the Kaleido-Alto/Quad with which
the connection has to be established.