R LTO User's Manual X23 2-WAY STEREO/3-WAY MONO ACTIVE CROSSOVER www.altoproaudio.com Version 1.0 SEP.
IMPORTANT SAFETY INSTRUCTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK PLEASE DO NOT REMOVE THE COVER OR THE BACK PANEL OF THIS EQUIPMENT. THERE ARE NO PARTS NEEDED BY USER INSIDE THE EQUIPMENT. FOR SERVICE, PLEASE CONTACT QUALIFIED SERVICE CENTERS. WARNING To reduce the risk of electric shock and fire, do not expose this equipment to moisture or rain. Dispose of this product should not be placed in municipal waste and should be separate collection. 11.
IN THIS MANUAL: 1. 2. 3. 4. 5. 6. 7. INTRODUCTION..........................................................................1 FEATURES.................................................................................1 CONTROL ELEMENTS.................................................................2 APPLICATION.............................................................................4 INSTALLATION & CONNECTION....................................................6 TECHNICAL SPECIFICATIONS...................
SP OT L IG 3.
SP OT L IG 3. CONTROL ELEMENTS HT REAR PANEL 13 13 PUSH PUSH STEREO MONO Rated Power Consumption 8.
3. ELEMENTS 4. CONTROL APPLICATIONS 2-Way Stereo To work in this mode, configure your system and connect cables as follow: 1. Release the MODE switch to enter into the 2-way stereo mode. 2. Feed a stereo signal from the Mixer to the Input Connectors of CH1 and CH2. 3. Output the Low frequencies signal via OUT LOW 1 & 2 to the power amplifier dedicated to the woofers. 4. Output the High frequencies signal via OUT HIGH 1 & 2 to the power amplifier dedicated to the high frequency transducers. 5.
3. ELEMENTS 4. CONTROL APPLICATIONS 3-WAY MONO To work in this mode, configure your system and connect cables as follow: 1. Press the MODE switch to enter into the 3-way mono mode. 2. Feed a mono signal from the Mixer to the input connector of CH1. 3. Output the Low frequencies signal via OUT LOW 1 to the power amplifier dedicated to the woofers. 4. Output the Mid frequencies signal via OUT LOW 2 to the power amplifier dedicated to the midrange. 5.
5. INSTALLATION AND CONNECTION Ok, you have got to this point and you are now in the position to operate your X23 successfully. However, we advise you to read carefully the following section to be the real master of your own mix. Not paying attention enough to the input signal level, to the routing of the signal and the assignment of the signal will result in unwanted distortion, a corrupted signal or no sound at all. So you should follow this procedure for every single channel: 5.
3. ELEMENTS 5.
6.
7. WARRANTY 1. WARRANTY REGISTRATION CARD To obtain Warranty Service, the buyer should first fill out and return the enclosed Warranty Registration Card within 10 days of the Purchase Date. All the information presented in this Warranty Registration Card gives the manufacturer a better understanding of the sales status, so as to provide a more effective and efficient after-sales warranty service.
SEIKAKU TECHNICAL GROUP LIMITED NO. 1, Lane 17, Sec. 2, Han Shi West Road, Taichung 40151, Taiwan http://www.altoproaudio.com Tel: 886-4-22313737 email: alto@altoproaudio.com Fax: 886-4-22346757 All rights reserved to ALTO. All features and content might be changed without prior notice. Any photocopy, translation, or reproduction of part of this manual without written permission is forbidden.
