User`s manual

MIN MAX
PFL LEVEL
PFL
MAIN
PFL MIX
STEREO
SPLIT
PFL MODE
7
3.1.4 The LEVEL METER Section
-.LEVEL METER Display
This 10 segments LED's Meter will monitor the output level.
17
3.1.2 The MAIN OUT Section
-. OUT A Control
The OUT A control is used to adjust the main level of the AMP
output on rear panel.
-. BAL A Control
10
The BAL A control is used to adjust the stereo balance of the
AMP output on rear panel.
-. OUT B Control
11
The OUT B control is used to adjust the main level of the
BOOTH output on rear panel.
-.PFL MODE Switch
16
This is a 2-position switch. When the switch is in STEREO
position, the PFL MIX control will fade between PFL signal and
MAIN output. When the switch is in SPLIT position, the PFL
MIX control has no influence on the PFL signal.
TALK ON
MIN MAX
TALK
OUT B
BAL A
OUT A
LEFT
RIGHT
MIN
MAX
OFF
MAX
MAIN OUT
+10
+7
+4
+2
0
-2
-4
-7
-10
-20
LEVEL METER
13
-. TALK Control
12
When you speak through a connected microphone, the volume
of the reproduced music will be automatically reduced by the
mixer for better intelligibility of your voice. You can determine
yourself how much the volume of the music will be reduced
via this control. You can turn off the TALK function via this
button .
13
3.1.3 The PFL Section
-.PFL LEVEL Control
14
This knob will adjust the level of the headphone signal.
When you connect a headphone to your MX-30, you have
the chance of pre-listening the audio signal before the signal
reach the main output.
-.PFL MIX Control
15
When set the switch mode in STEREO position, you can
fade between PFL and MAIN output.
16
9
10
11
12
9
14
15
16
17