User`s manual

LTO

Parameter Menus & System Set-up

You can set the UCS PRO to cut the signal if it falls below a certain level. Most often used to cut the background noise

between music tracks.

GLOBAL: Within the PC Editor's tabbed menu view, you will see a tab labelled "Global" on the far right. This window

shows the response curves of all channel outputs and provides a convenient overview of your settings.

NOISE GATE:

Each of the channels (both inputs and outputs) has a fully variable 5-band parametric equalizer.

PARAMETRIC EQUALIZATION (EQ):

MASTER DELAY:

Allows a delay to be applied to the signal fed from one or both of the Input Channels.

The UCS PRO is equipped with independent HIGH-PASS and LOW-PASS filters on each of the 6 output channels. For

each filter there are 10 different filter type/slope options.

CROSSOVER (XOVER):

virtual speakers.

CHANNEL DELAY:

Allows a delay to be applied in order to "time align" each individual output channel. Includes a graphical interface of 6

PARAMETRIC EQUALIZATION (EQ):

Each of the channels (both inputs and outputs) has a fully variable 5-band parametric equalizer.

DYNAMIC GAIN CONTROL (CMP/LIM):

Each Output channel has its own independent COMPRESSOR/LIMITER. Careful setting of the parameters will help to

maintain a more consistent and pleasurable listening level and extend the performance of your speakers.