User`s manual

LTO

Introduction

Dear Customer,

Thank you for choosing the ALTO Mobile UCS PRO digital sound processor and speaker management system. We hope

you will enjoy using this product as much as we enjoyed developing it. The ALTO Mobile range is the result of considerable

research and development in our R&D centers in Europe and the Far East. It is a very close cousin of ALTO's professional

digital signal processors. We've been designing products for musicians and recording studios for a long time, so the car

audio product you now have in your hands has an unusually fine pedigree.

The passenger cabin of a vehicle is worlds away from the controlled listening environment of the recording studio, and

yet much of the same sound processing techniques can be applied with spectacular success. ALTO Mobile is a specialist

division of audio and computer software engineers, but above all we are car audio enthusiasts who love the challenge

of trying to reproduce studio quality sound inside a moving vehicle. Products such as the one you now own help to make

this possible.

If you've not yet had your UCS PRO installed in your vehicle, that is obviously the first thing you will need to do. We

strongly recommend that you have the unit professionally installed and set-up by a specialist company authorized by the

ALTO Mobile distributor in your country. The installation instructions in this manual are not intended to be a thorough

explanation of all the steps involved in correctly fitting and setting up this unit. The instructions assume that the person

installing the equipment has been trained to carry out such work.

You are an important member of our team. We listen to what our customers say and take on board their suggestions. It

is this feedback that helps us create the products you want. So if you have any comments, please let us know via email

to "feedback@altomobile.com".

THE ALTO MOBILE TEAM

10R - 023484