User`s manual

LTO

Specifications

Channel Layout: 2 inputs / 6 outputs (phono type)

Inputs 2V rms / Outputs 2.2V rms (0dB).

24 bits A-D and D-A

20Hz - 20KHz (+/- 1dB)

>95dBA

0.05% (20Hz - 20KHz)

>100dB, 20Hz - 20KHz

-30 to +6 dB (0.5 dB steps)

High-Pass & Low-Pass (Bessel, Butterworth or Linkwitz-Riley)

Filter slopes: selectable 6, 12, 18, 24, 48dB per octave

Gain: +/- 15dB, 0.5dB step

Frequency: 15.6Hz to 16KHz

Bandwidth (Q): 0.05 to 3 octaves, 0.05 oct. step

0 - 291 ms (outputs), 0.021ms step

Variable Threshold & Ratio, per output channel

1 factory / 64 user (non-volatile)

9-pin RS232. Requires PC running Windows 98/ME/XP

25-pin D-SUB connector for optional Programmer

11 - 16V DC (negative ground)

228 x 175 x 42mm (including mounting brackets)

1.3kg

Max. input/output level:

Conversion:

Freq. Response:

S/N Ratio:

THD+N:

Channel Separation:

Input/Output Gain range:

Crossover Filters:

EQ Filters (Input/Output channels)

Channel Delay (Time Alignment):

Dynamic Level Control:

On-board Preset Memory:

PC Interface:

Other Interfaces:

Operating Voltage:

Dimensions:

Weight: