User`s manual

LTO

Parameter Menus & System Set-up

RS232 > Port: Shows the current RS232 port (COM) used by the PC Editor and allows other choices to be selected, if

available on your computer.

RS232 > BAUD RATE: Provides options to select the communication speed.

IMPORTANTIMPORTANT

Reliable data transmission can usually be expected as long as the cable length is not more than 5 meters.

ADVANCEDADVANCED

TIPTIP

The RS232 serial port default speed is 9600 bits per second. In the OPTIONS menu it is possible to set

a speed of up to 115200 bits per second. If you experience transmission problems or disconnection, reduce

the speed of the serial data transmission.

First Steps with the PC EDITOR

To avoid accidentally overwriting an existing PRESET, it is important that you follow the correct routine when initiating a

session between the UCS PRO and your computer.

1] With the UCS PRO powered up and connected to your PC's serial port as described, Run the PC Editor program by

selecting the MAXI EDITOR icon in the Windows PROGRAMS menu.

2] The PC Editor should now load. A welcome screen will appear. This closes after 5 seconds (or click on it). Select NEW

from the FILE menu. A window will open showing several different model names, because the same software is used

for some of our pro audio models. Select UCS PRO and click OK. You will then be presented with 2 options - NEW UNIT

and NETWORK SCAN.

If your UCS PRO has already been installed and set-up and you now wish to view and/or modify some parameters,

do the following:

Select NETWORK SCAN. The program will scan your PC's serial ports. When Done, it will present a list of IDs. The ID

number of the UCS PRO is 1 (this cannot be changed). The ID list will show if the UCS PRO (ID 1) is correctly connected

or not. Pressing OK will prompt the system to retrieve (upload) all the parameters and all previously saved USER PRESETS

from the UCS PRO to your computer. A window will automatically open on your computer screen. You can now view the

settings and edit them (depending on the Lock mode).