User`s manual
LTO
LTO
TM
Edit Mode (Password Protection)
UCS PRO incorporates a password system and your installer may have set a password to ensure that vital settings are
not altered. In this case you will NOT be able to alter all of the parameters via the PC Editor.
In the PC Editor, select FILE > OPTIONS and then the LOCK tab. This will present you with a menu:
Full Edit: This is the DEFAULT mode. No password is set at the factory. From here you can lock the unit by clicking within
the empty Partial Lock or Total Lock buttons. A text box will open, allowing you to enter a password of your own choice.
Click OK. It is important that you remember this password.
Partial Lock: In this mode, only the INPUT parameters may be edited. This is useful since it allows critical settings such
as the crossover points to be locked, while still allowing the user access to some overall EQ adjustment.
To enable Partial Lock, a new password must be entered as above. To disable the lock, click within the empty Full Edit
button. A text box will open. Type the password that was used to set lock mode. Press OK.
Total Lock: No editing is possible in this mode. To enable Total Lock, a new password must be entered as above.
To disable the lock, follow the same instructions for disabling Partial Lock.
Parameter Menus & System Set-up
Help File
The HELP file accessible from within the PC Editor will be updated as necessary. Since software updates after the printing
of this manual may affect the instructions provided here, please check the Help File for any later remarks.
Introduction to the PC EDITOR
Click on one of the icons on the welcome screen (the block diagram) of the PC Editor. A window will appear showing one
of several 'pages' where you can set the parameters using virtual knobs and sliders or by typing the values. Here is a
brief overview of the various functions that make up the UCS PRO PC Editor. Each is explained in more detail in the next
section.
This page presents 8 virtual slide controls, similar to what you would see on a professional sound mixing desk. From here
you can adjust the input/output LEVELS and output channel MUTE and PHASE.
GAIN CONTROL SECTION:
11