241-9960 4" ANGLE GRINDER Operator’s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe dry place for future reference.
IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. READ ALL INSTRUCTIONS BEFORE USING THIS TOOL 1. KEEP WORK AREA CLEAN. Cluttered areas can cause injuries. 2. CONSIDER WORK AREA ENVIRONMENT. Don’t use power tools in damp, wet, or poorly lit locations. Don’t expose tools to the rain. Keep the work area well lit.
IMPORTANT SAFETY INSTRUCTIONS 15. USE EYE PROTECTION. Use a full-face mask if the work you’re doing produces metal filings, dust or wood chips. Goggles are acceptable in other situations. Wear a clean dust mask if the work involves creating a lot of fine or coarse dust. 16. SECURE WORK. Use clamps or a vise to hold the work. It’s safer than using your hands and it frees both hands to operate the tool. 17. DON’T OVERREACH. Keep proper footing and balance at all times.
FUNCTION DESCRIPTION Functional description: 1. On-Off switch 2. Side Handle 3. Spindle lock 4. Wheel Guard 5. Wheel 1 3 2 5 OPERATING PROCEDURES Grinding and Cut-off Wheels This angle grinder is designed to accept only 4 ” abrasive discs with a 5/8” bore. Check to ensure that any discs used on this machine are rated for the 11,500 /min speed of this grinder. Check also for any damage to an abrasive disc before installing.
OPERATING PROCEDURES ADJUSTMENTS Guard This grinder comes with an adjustable wheel guard installed. This is to allow you to grind at various angles and still be protected to some extent from flying residue or debris. Unplug the grinder. Loosen the clamping screw on the collar and rotate the guard to give you protection and expose the disc on the appropriate side. Tighten the screw to clamp the guard in place. Do not use this tool with the guard removed.
PARTS LIST ADJUSTMENTS Please refer to the schematic drawing on page 7.
SCHEMATIC DRAWING ! WARNING Repairs should be made by an authorized repair centre.Do not open or disassemble this power tool. Contact customer service at 1-866-915-8626 for questions regarding this power tool.
ALTOCRAFT ® 4" ANGLE GRINDER WARRANTY 1-YEAR LIMITED WARRANTY: SHARP GROUP ENT. INC. warrants this product to the original purchaser only, for (1) year from date of purchase, against any defects in material or workmanship. The defective product will be replaced or repaired at the sole discretion of the manufacture.
