Use And Care Manual

FUNCTION DESCRIPTION

OPERATING PROCEDURES

Grinding and Cut-off Wheels

This angle grinder is designed to accept only 4 ” abrasive discs with a 5/8”

bore. Check to ensure that any discs used on this machine are rated for the

11,500 /min speed of this grinder. Check also for any damage to an abrasive disc

before installing. Any disc that is cracked, has been dropped, or subjected

to other damage due to temperature extremes or solvents should be discarded. A

damaged disc can ﬂy apart in use and may cause serious injury to the operator or

bystanders.

Functional description:

1. On-Off switch

2. Side Handle

3. Spindle lock

4. Wheel Guard

5. Wheel