Datasheet

• This single output power supply/charger converts a 115VAC/60Hz input
into one (1) 12VDC non-power limited output.
• 12VDC output.
• 10 amp of continuous supply current.
• Input 115VAC / 60Hz, 1.9 amp.
• Input fuse rated @ 3.5 amp/250V.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid
or gel type batteries.
• Maximum charge current .7 amp.
• Automatic s
witch over to stand-by battery when
AC fails (zero voltage drop).
• AC fail supervision (form "C" contacts).
• Low battery supervision (form "C" contacts).
• Battery presence supervision (form “C” contacts).
• AC input and DC output LED indicators.
• Enclosure:
- Combination knockouts are 1/2” and 3/4”.
- Accommodates one (1) 12VDC/12AH battery.
• Product weight:
- AL1012ULX: 9.3 lbs.
• Shipping weight:
- AL1012ULX: 10.6 lbs.
AL1012ULX Power Supply/Charger
Rev. DSAL1012ULX - F07G
Overview
Agency Approvals
Specifications
UL 294
UL Listed for Access Control
System Units.