AL1012ULX Series Power Supply/Charger Installation Guide Models Include: • AL1012ULX - Single Output • AL1012ULXPD4 • AL1012ULXPD4CB - Four (4) Fused Outputs - Four (4) PTC Outputs • AL1012ULXPD8 • AL1012ULXPD8CB - Eight (8) Fused Outputs - Eight (8) PTC Outputs • AL1012ULXPD16 • AL1012ULXPD16CB - Sixteen (16) Fused Outputs - Sixteen (16) PTC Outputs LISTED Rev.
Overview: The AL1012ULX is a power supply that converts a 115VAC / 60Hz input to a 12VDC output (see specifications). The AL1012ULX is a base unit for a series of UL Listed multi-output power supply/chargers including: AL1012ULXPD4, AL1012ULXPD4CB, AL1012ULXPD8, AL1012ULXPD8CB, AL1012ULXPD16, AL1012ULXPD16CB (Refer to AL1012ULX Series Power Supply Configuration Reference Chart below).
b. For Power Distribution Module(s): connect devices to be powered to the terminal pairs 1 to 4 marked [1P & 1N through 4P & 4N] (Fig. 2, pg. 6) or 1 to 8 marked [1P & 1N through 8P & 8N] (Fig. 3, pg. 6), carefully observing correct polarity. 5. For Access Control applications batteries are optional. When batteries are not used, a loss of AC will result in the loss of output voltage. When the use of stand-by batteries is desired, they must be lead acid or gel type. 6.
Terminal Identification: PD4/PD4CB/PD8/PD8CB - Power Distribution Module Terminal Legend PD4/PD4CB PD8/PD8CB Function/Description 1P to 4P 1P to 8P Positive DC power outputs. 1N to 4N 1N to 8N Negative DC power outputs.
Fig. 1 CAUTION: De-energize unit prior to servicing. VR1 15 Non power-limited Door Battery and AC Supervision Circuit (power-limited) Use separate knockout AC FAIL L G N AC DELAY BAT FAIL 5A 250V Battery connection (non power-limited) NC C NO NC C NO 115 power mains (non power-limited) Class 1 Earth Ground Divider Wire Strap (from Enclosure to Door) 3.5A 250V 3.5A 250V 3.
Power Distribution Module(s): Fig. 2 F1 F1 Used on PTC Models F2 F3 F4 1P, 2P, 3P, 4P = FUSED OUTPUTS 1N, 2N, 3N, 4N = COMMON OUTPUTS PD4 POWER DISTRIBUTING UNIT LED 1P 2P 1N COMMON 2N POWER 3P 3N 4P 4N INPUT OUTPUTS DC Output to devices From Power Supply Board (Factory Installed) 1 Used on PTC Models MAIN FUSE ALTRONIX CORP. MADE IN USA BROOKLYN, NY 11220 Fig.
Notes: AL1012ULXseries - 7 -
Enclosure Dimensions (BC400): 15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm) 1.5” (38.1mm) 4.615” (117.22mm) 4.615” (117.22mm) 1.5” (38.1mm) 1.75” (44.45mm) 1.375” (34.925mm) 1.125” (28.575mm) 1.25” (31.75mm) 4.5” (114.3mm) 12.23” (310.64mm) 1.1” (27.94mm) 0.91” (23.114mm) 1.5” (38.1mm) 4.5” (114.3mm) 1.1” (27.94mm) 1.25” (31.75mm) 0.91” (23.114mm) 2.0” (50.8mm) 1.5” (38.1mm) 15.5” (393.7mm) 2.0” (50.8mm) 5.0” (127.0mm) 5.0” (127.0mm) 1.1” (27.94mm) 1.25” (31.75mm) 0.79” (20.
