Spec Sheet

AL1012ULX
Specifications
Input:
Input 115VAC, 60Hz, 2.6 amp.
Input fuse rated @ 5 amp/250V.
Output:
12VDC output.
10 amp continuous supply current.
Output fuse rated @ 15 amp/32V.
Filtered and electronically regulated output.
Short circuit and thermal overload protection.
Battery Backup:
Built-in charger for sealed lead acid or
gel type batteries.
Automatic switch over to stand-by battery
when AC fails.
Maximum charge current 0.7 amp.
Supervision:
AC fail supervision (form “C” contacts).
- Notification trigger is selectable for
30 seconds (factory set) or 6 hours.
Low battery supervision (form “C” contacts).
Battery presence supervision (form “C” contacts).
Visual Indicators:
AC input and DC output LED indicators.
Electrical:
Operating temperature: 0º C to 49º C ambient.
61.42 BTU/Hr.
System AC input VA requirement: 299VA.
Mechanical:
Enclosure Dimensions (H x W x D approx.):
15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm)
- Accommodates one (1) 12VDC/12AH batteries.
Product weight (approx.): 9.3 lbs. (4.22 kg).
Shipping weight (approx.): 10.6 lbs. (4.81 kg).
AL1012ULX is a power supply/charger that converts a 115VAC 60Hz input
into a single 12VDC non power-limited output.
AL1012ULX
Power Supply/Charger
Rev. DSAL1012ULX_05052015
Overview
Agency Approvals
UL 294 UL Listed for Access Control System Units.
General Signaling Equipment
Evaluated to CSA Standard C22.2 No.205-M1983

Summary of content (2 pages)