Spec Sheet

ManualsBrandsAltronix Manualselectrical connectionAL1024ULXPD4

Specifications

Input:

• Input 115VAC, 60Hz, 4.2 amp.

• Input fuse rated @ 3.5 amp/250V.

Output:

• 24VDC output.

• 10 amp of continuous supply current for

Access Control applications.

• 8 amp of continuous supply current for

Fire Alarm applications.

• Four (4) fuse protected outputs.

• Output fuses are rated @ 3.5 amp/250VAC.

• Filtered and electronically regulated output.

• Short circuit and thermal overload protection.

Battery Backup:

• Built-in charger for sealed lead acid or

gel type batteries.

• Automatic switch over to stand-by battery

when AC fails.

• Maximum charge current 3.6 amp.

Supervision:

• AC fail supervision (form “C” contacts).

- Notification trigger is selectable for

30 seconds (factory set) or 6 hours.

• Low battery supervision (form “C” contacts).

• Battery presence supervision (form “C” contacts).

Visual Indicators:

• AC input and DC output LED indicators.

Electrical:

• Operating temperature: 0º C to 49º C ambient.

• 122.84 BTU/Hr.

• System AC input VA requirement: 483VA.

Mechanical:

• Enclosure Dimensions (H x W x D approx.):

15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm)

- Accommodates up to two (2) 12VDC/12AH batteries.

• Product weight (approx.): 10.1 lbs. (4.58 kg).

• Shipping weight (approx.): 11.4 lbs. (5.17 kg).

AL1024ULXPD4 is a multi-output power supply/charger that converts a

115VAC 60Hz input into four (4) 24VDC non power-limited outputs.

AL1024ULXPD4

Multi-Output Power Supply/Charger

Rev. DSAL1024ULXPD4_05052015

Overview

Agency Approvals

UL 294 UL Listed for Access Control

System Units.

UL 1481 UL Listed Standard for Safety for

Fire Protective Signaling Systems.

General Signaling Equipment

Evaluated to CSA Standard C22.2

No.205-M1983

AL1024ULXPD4

Summary of content (2 pages)

PAGE 1
AL1024ULXPD4 Multi-Output Power Supply/Charger Rev. DSAL1024ULXPD4_05052015 Overview AL1024ULXPD4 is a multi-output power supply/charger that converts a 115VAC 60Hz input into four (4) 24VDC non power-limited outputs. AL1024ULXPD4 Specifications Supervision: Input: • Input 115VAC, 60Hz, 4.2 amp. • Input fuse rated @ 3.5 amp/250V. Output: • 24VDC output. • 10 amp of continuous supply current for Access Control applications. • 8 amp of continuous supply current for Fire Alarm applications.
PAGE 2
Enclosure Dimensions (H x W x D approximate): 15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm) 1.5” (38.1mm) 4.615” (117.22mm) 4.615” (117.22mm) 1.5” (38.1mm) 1.75” (44.45mm) 1.375” (34.925mm) 1.125” (28.575mm) 1.25” (31.75mm) 4.5” (114.3mm) 12.23” (310.64mm) 1.1” (27.94mm) 0.91” (23.114mm) 1.5” (38.1mm) 4.5” (114.3mm) 1.1” (27.94mm) 1.25” (31.75mm) 0.91” (23.114mm) 2.0” (50.8mm) 1.5” (38.1mm) 15.5” (393.7mm) 2.0” (50.8mm) 5.0” (127.0mm) 5.0” (127.0mm) 1.1” (27.94mm) 1.25” (31.