Installation Instructions

ManualsBrandsAltronix ManualsAutomation & SecurityPower Supply Charger, Single Fused Output, 24VDC @ 10A, 220VAC, BC400 Enclosure

Rev. 122905

More than just power.

Installing Company: _______________ Service Rep. Name: __________________________________

Address: _____________________________________________ Phone #: __________________

AL1024X220 Series

Power Supply/Charger

Models Include:

Installation Guide

AL1024X220

- Single Output.

AL1024XPD4220

- Four (4) Fuse Protected Outputs.

AL1024XPD8220

- Eight (8) Fuse Protected Outputs.

AL1024XPD16220

- Sixteen (16) Fuse Protected Outputs.

AL1024XPD4CB220

- Four (4) PTC Protected Outputs.

AL1024XPD8CB220

- Eight (8) PTC Protected Outputs.

AL1024XPD16CB220

- Sixteen (16) PTC Protected Outputs.

Summary of content (8 pages)

PAGE 1
AL1024X220 Series Power Supply/Charger Models Include: AL1024X220 - Single Output. AL1024XPD4220 - Four (4) Fuse Protected Outputs. AL1024XPD8220 - Eight (8) Fuse Protected Outputs. AL1024XPD16220 - Sixteen (16) Fuse Protected Outputs. AL1024XPD4CB220 - Four (4) PTC Protected Outputs. AL1024XPD8CB220 - Eight (8) PTC Protected Outputs. AL1024XPD16CB220 - Sixteen (16) PTC Protected Outputs. Installation Guide Rev. 122905 More than just power.TM Installing Company: ________________ Service Rep.
PAGE 2
Overview: Altronix AL1024X220 is a power supply that converts a nominal 220VAC (working range 198VAC-256VAC) 50/60Hz input to a 24VDC regulating output (see specifications). AL1024X220 is a base unit for a series of multi-output power supply/chargers including: AL1024XPD4220, AL1024XPD4CB220, AL1024XPD8220, AL1024XPD8CB220, AL1024XPD16220, AL1024XPD16CB220 (Refer to AL1024X220 Series Power Supply Configuration Reference Chart below).
PAGE 3
Installation Instructions: AC FAIL C NO NC NO BAT FAIL C NC G N L - BAT + DC AC + DC - Wiring methods should be in accordance with the National Electrical Code/NFPA 70/NFPA 72/ANSI and with all local codes and authorities having jurisdiction. Product is intended for indoor use only. 1. Mount unit in the desired location. Mark and predrill holes in the wall to line up with the top two keyholes in the enclosure.
PAGE 4
Fig. 1 - AL1024X220 Series CAUTION: De-energize unit prior to servicing. For continued protection against risk of electric shock and fire hazard replace fuse with the same type and rating. Do not expose to rain or moisture.
PAGE 5
LED Diagnostics: Power Supply Board Red (DC) ON ON OFF OFF Green (AC) ON OFF ON OFF Power Supply Status Normal operating condition. Loss of AC. Stand-by battery supplying power. No DC output. Loss of AC. Discharged or no stand-by battery. No DC output. Power Distribution Module Green ON OFF Power Distribution Module Status Normal operating condition. No Power Output.
PAGE 6
Power Distribution Module(s): Fig. 2a - PD4 Power Distribution Board Fig. 2b - PD4CB - Power Distribution Board Fuse Protected Outputs PTC Protected Outputs Replace fuses with the same type and rating 3.
PAGE 7
Battery Size Calculation Worksheet: A. AL1024X220 series internal current consumption (stand-by) ________________ 0.05 A B. Load current consumption (stand-by) ________________ A C. Stand-by time required (hours) ________________ H D. Battery capacity required for stand-by (A+B)*C ________________ AH E. AL1024X220 series internal power consumption (Alarm) ________________ 0.05 A F. Load current consumption (Alarm) ________________ A G. Alarm duration (Hours; 15 Min. = 0.
PAGE 8
Enclosure Dimensions (BC400): 15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm) 1.5” (38.1mm) 4.615” (117.2mm) 4.615” (117.2mm) 1.5” (38.1mm) 1.75” (44.5mm) 1.25” (31.8mm) 4.5” (114.3mm) 1.1” (27.9mm) 12.23” (310.6mm) 4.5” (114.3mm) 1.1” (27.9mm) 1.375” (34.9mm) 1.5” (38.1mm) 1.25” (31.8mm) 1.5” (38.1mm) 0.91” (23.1mm) 0.91” (23.1mm) 1.125” (28.6mm) 15.5” (393.7mm) 2.0” (50.8mm) 2.0” (50.8mm) 5.0” (127.0mm) 0.79” (20.1mm) 5.0” (127.0mm) 1.25” (31.8mm) 1.25” (31.8mm) 1.1” (27.9mm) 1.