Installation Instructions

ManualsBrandsAltronix ManualsAutomation & SecurityPower Supply Charger, Single Fused Output, 24VDC @ 10A, 220VAC, Board

Overview:

Altronix XBV Series power supply/chargers convert a 220VAC (working range 198VAC - 256VAC), 50/60Hz input

to a 12VDC or 24VDC output.

Specifications:

Altronix

Model Number

Input Rating

220VAC

50/60Hz

Output Voltage (Current)

Input Fuse

Rating

Battery Fuse

Rating

Maximum

Charge Current

12VDC 24VDC

AL300XB2V

1.5A 2.5A 2.5A 5A / 250V 15A / 250V 0.7A

AL400XB2V

1.5A 4A 3A 5A / 250V 15A / 250V 0.7A

AL600XB220

1.5A 6A 6A 5A / 250V – 0.7A

AL1012XB220

1.3A 10A – 5A / 250V 15A / 250V 0.7A

AL1024XB2V

2.5A – 10A 5A / 250V 15A / 250V 3.6A

Output:

• Filtered and electronically regulated output.

Battery Backup:

• Built-in charger for sealed lead acid or

gel type batteries.

• Automatic switch over to stand-by battery

when AC fails.

• Zero voltage drop when switched over to

battery backup.

Visual Indicators:

• AC input, DC output and BAT trouble LED indicators.

Supervision:

• AC fail supervision (form “C” contacts).

• Low battery and battery presence supervision

(form “C” contacts).

Additional Features:

• Short circuit and thermal overload protection.

Board Dimensions (L x W x H approximate):

AL300XB2V:

7.1” x 4.5” x 1.44”

(180.3mm x 114.3mm x 36.6mm).

AL400XB2V:

7.1” x 4.5” x 1.44”

(180.3mm x 114.3mm x 36.6mm).

AL600XB220:

7.1” x 4.5” x 2”

(180.3 mm x 114.3 mm x 50.8 mm).

AL1012XB220:

7.25” x 4.5” x 1.75”

(184.2mm x 114.3mm x 44.5mm).

AL1024XB2V:

8.4” x 4.5” x 1.4”

213.4mm x 114.4mm x 35.6mm).

XBV Series

Power Supply/Charger Boards

Installation Guide

Summary of content (4 pages)

PAGE 1
XBV Series Power Supply/Charger Boards Installation Guide Overview: Altronix XBV Series power supply/chargers convert a 220VAC (working range 198VAC - 256VAC), 50/60Hz input to a 12VDC or 24VDC output. Specifications: Altronix Model Number Input Rating 220VAC 50/60Hz AL300XB2V AL400XB2V AL600XB220 AL1012XB220 AL1024XB2V 1.5A 1.5A 1.5A 1.3A 2.5A Output Voltage (Current) 12VDC 24VDC Input Fuse Rating 2.5A 4A 6A 10A – 2.
PAGE 2
AL300XB2V: Output 12VDC / 40AH Battery Stand-by Specifications: 4 hr. of Stand-by and 5 Minutes of Alarm Stand-by = 2.5A Alarm = 2.5A 24VDC / 12AH Battery – 24VDC / 40AH Battery Stand-by = 2.5A Alarm = 2.5A 24 hr. of Stand-by and 5 Minutes of Alarm Stand-by = 1.0A Alarm = 2.5A Stand-by = 200mA Alarm = 2.5A Stand-by = 1.0A Alarm = 2.5A 60 hr. of Stand-by and 5 Minutes of Alarm Stand-by = 300mA Alarm = 2.5A 24 hr. of Stand-by and 5 Minutes of Alarm Stand-by = 1.0A Alarm = 4.
PAGE 3
Installation Instructions: Wiring methods shall be in accordance with in accordance with article 760 of The National Electrical Code or NFPA 72, as well as all applicable local codes and authorities having jurisdiction. Product is intended for indoor use only. 1. Mount the power supply/charger board in the desired location/enclosure (mounting hardware included). 2. Set desired DC output voltage by setting SW1 to the appropriate position on the power supply board (Fig. 1e, pg. 4). 3.
PAGE 4
Fig. 1 - XBV configuration AC 5A 250V L G N + DC --- 1d** + BAT --- 1c*** BAT BAT FAIL NC 1a * ** *** DC ON 1e* OFF --- 24V ON --- 12V C NO NC C NO AC FAIL 1b Output Voltage Selection DIP Switch. Not applicable for AL1012XB220 and AL1024XB2V. AL1012XB220 terminals marked [– DC +] AL1024XB2V terminals marked [– BAT +] Terminal Identification: Terminal Legend Function/Description L, G, N (Fig. 1a, pg. 4) Connect 220VAC to these terminals: L to hot, G to ground, N to neutral.