Installation Instructions

ManualsBrandsAltronix ManualsAutomation & SecurityAccess Control Power Supply Charger, 2 PTC Class 2 Outputs, 12/24VDC @ 1.75A, 220VAC, BC300 Enclosure

Rev. 011316

More than just power.

Installing Company: _______________ Service Rep. Name: __________________________________

Address: _____________________________________________ Phone #: __________________

AL175220 Series

Access Control

Power Supply/Chargers

Models Include:

AL175220

- Enclosure Dimensions: 8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm).

- Accommodates one (1) 12VDC/4AH battery.

AL175X220

- Enclosure Dimensions: 13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.6mm).

- Accommodates up to two (2) 12VDC/7AH Batteries.

Installation Guide

Summary of content (8 pages)

PAGE 1
AL175220 Series Access Control Power Supply/Chargers Models Include: AL175220 - Enclosure Dimensions: 8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm). - Accommodates one (1) 12VDC/4AH battery. AL175X220 - Enclosure Dimensions: 13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.6mm). - Accommodates up to two (2) 12VDC/7AH Batteries. Installation Guide Rev. 011316 More than just power.TM Installing Company: ________________ Service Rep.
PAGE 2
Overview: Altronix AL175220 and AL175X220 are power-limited power supply/chargers that converts 220VAC (working range 198VAC - 256VAC), 50/60Hz input into two individually PTC protected auto-resettable 12VDC or 24VDC outputs (see specifications). They are intended for use in Access Control applications and applications requiring an interface with the Fire Alarm Control Panels. They must be installed in accordance with National and Local Electrical Codes and Regulations.
PAGE 3
Wires). Minimum 0.25” spacing must be provided. CAUTION: Do not touch exposed metal parts. Shut branch circuit power before installing or servicing equipment. There are no user serviceable parts inside. Refer installation and servicing to qualified service personnel. 3. Set the unit to the desired DC output voltage by setting switch SW1 to the appropriate position (Power Supply Output Specification Table, pg. 2). 4. Measure output voltage before connecting devices. This helps avoiding potential damage. 5.
PAGE 4
Fig. 1 NC NO C TRG1 SW1 ON - 24V OFF - 12V TRG2 AC FAIL NC NO C ON SW1 DC VR1 AC LOCK + STRIKE + COM -- AUX + FACP AUX -- + BAT -- Switched Constant output DC output (Not affected (trigger control) by trigger) Stand-by Battery (optional) AC AC Input 220VAC 50/60Hz, 0.3A XFMR Red Lead Black Lead LED Diagnostics: Red (DC) ON ON OFF OFF Green (AC) ON OFF ON OFF Power Supply Status Normal function. Battery backup is powering output. No DC output. Loss of AC.
PAGE 5
Typical Application Diagrams: Fig. 2 Typical single mag lock or door strike installation with fire alarm tie-in using trigger controlled output: DOOR STRIKE LOCK + STRIKE + MAG LOCK COM -- PROX/CARD READER AUX + ACCESS CONTROL DEVICE AUX -- TRG2 FACP TRG1 Fig.
PAGE 6
Typical Application Diagrams: Fig. 4 Typical mag lock with fire alarm tie-in using aux output installation: ACCESS CONTROL DEVICE MAG LOCK AUX + FACP + FACP AUX -- Fig. 5 Latching fire alarm tie-in with manual reset: ACCESS CONTROL DEVICE LOCK + STRIKE + MAG LOCK COM -FACP TRG2 TRG1 C NO NO RESET SWITCH NC Fig.
PAGE 7
Enclosure Dimensions (H x W x D approximate): AL175220 8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm). Accommodates one (1) 12VDC/4AH battery. 7.25” (184.2mm) 3.625” (92mm) 3.5” (88.9mm) 1.25” (31.8mm) 0.6” (15.2mm) 0.6” (15.2mm) 6.05” (153.7mm) 1.125” (28.6mm) 1.125” (28.6mm) 1” (25.4mm) 1” (25.4mm) 8.125” (206.4mm) 2” (50.8mm) 2” (50.8mm) 1.25” (31.75mm) 6.05” (153.7mm) 0.6” (15.2mm) 1.25” (31.75mm) 3.5” (88.9mm) 0.6” (15.2mm) 1” (25.4mm) 1” (25.
PAGE 8
Enclosure Dimensions (H x W x D approximate): AL175X220 13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm) Accommodates up to two (2) 12VDC/7AH batteries. 1.40” (35.6mm) 4.85” (123.2mm) 4.85” (123.2mm) 1.40” (35.6mm) 1.20” (30.5mm) 0.75” (19.1mm) 3.25” (82.6mm) 1.20” (30.5mm) 0.75” (19.1mm) 12.5” (317.5mm) 11.0” (279.4mm) 1.20” (30.5mm) 0.9375” (23.8mm) 1.40” (35.6mm) 1.40” (35.6mm) 5.10” (129.5mm) 5.10” (129.5mm) 13.0” (330.2mm) 6.5625” (166.7mm) 5.10” (129.5mm) 0.9375” (23.8mm) 3.25” (82.