Spec Sheet

- 6 -

Wiring:

USE 14 AWG or larger for all power connections.

Note: Take care to keep power limited circuits separate from non-power limited wiring (115VAC, Battery).

Maintenance:

Unit should be tested at least once a year for the proper operation as follows:

Output Voltage Test: Under normal load conditions, the DC output voltage should be checked for proper voltage level

(Power Supply Voltage Output Specifications Chart, pg. 3).

Battery Test: Under normal load conditions check that the battery is fully charged, check specified voltage both at

battery terminal and at the board terminals marked [- BAT +] to insure there is no break in the battery connection

wires.

Note: Maximum charging current under discharges is .7 amp.

Note: Expected battery life is 5 years, however it is recommended changing batteries in 4 years or less if needed.

Enclosure Dimensions:

• AL300ULX

• AL300ULPD4

• AL300ULPD4CB

• AL300ULPD8

• AL300ULPD8CB

13”H x 13.5”W x 3.25”D

.81"

1.1875"

3.25"

0 1.1875" 3.25".75" 1.5" 6.25" 11"

1.4"

6.5"

5.5"

1.4"

11.66"

12.1"

13"

12.5"

11.75"

TOP ONLY