Installation Instructions User Manual

M series - 5 -
Battery connection (non-power limited)
Wire
Strap
(from
Enclosure
to Door)
115VAC
power mains
non-power
limited
Class 1
Divider
NC C NO
DRY OUTPUT
TRIGGER
LED
678910
POS (+) DC OUTPUT (STANDBY)
NC C NO
POWER FAIL
TRIGGER
12345
POS (+) DC OUTPUT (ALARM)
NEG1 NEG2 NEG3 NEG4 NEG5
-- DC INPUT +
NEG (-) INPUT POS (+)
DC Outputs to devices
(power limited)
Fire Alarm
Interface
non-power limited
CAUTION: De-energize unit prior to servicing. For continued protection
against risk of electric shock and fire hazard replace fuses with the same type
and rating (see marking on the board). Do not expose to rain or moisture.
CAUTION: When power supply board is set for 12VDC use only one (1) 12VDC
stand-by battery.
Keep power limited wiring separate from non-power limited. Use minimum 0.25" spacing.
Power Limited
12VDC Rechargeable Battery
(optional)
12VDC Rechargeable Battery
(optional)
+ DC ---
NC C NO NC C NO
+ BAT ---
AC DC Bat
Risk of Fire, Replace Fuses As Marked
Opened - 24V Closed - 12V
AC Fail
Bat Fail
J1
SW1
5A 250V
15A 250V
AC Delay
15
L G N
Battery &
AC Supervision Circuit
(power limited)
NC C NO NC C NO
J1
AC Delay
Open - 24V
Closed - 12V
SW1
Green
Lead
(ground)
Fig. 1
AL300ULM
AL400ULM
Fig. 1a
Fig. 1b
Fig. 1c