Installation Manual

Overview:

These linear power supply/charger kits have a wide range of applications including: access control, security and CCTV

system accessories that require additional power.

Specifications:

AL62412C/AL62412CX:

• 12VDC@1.2ampcontinuoussupplycurrent.

• Kitincludes:powersupply,12VDC4AH(AL62424CX-12VDC7AH)rechargeablebatteryand16.5VAC20VA

 Class2Ratedplug-intransformer.

AL62424C:

• 24VDC@750mAcontinuoussupplycurrent.

• Kitincludes:powersupply,two(2)12VDC4AHrechargeablebatteriesand24VAC40VAClass2Rated

 plug-intransformer.

Installation Instructions:

1. Mountunitinthedesiredlocation/enclosure.

2. Unitisfactorysetforcorrectoutputvoltage.

3. Connectwallplug-intransformertotheterminalsmarked[AC].

 Use18AWGorlargerforallpowerconnections(Battery,DCoutput).

4. Measureoutputvoltagebeforeconnectingdevices.Thishelpsavoidingpotentialdamage.

5. Devicestobepoweredshouldbeconnectedtotheterminalsmarked[+DC]and[DC-BAT]carefullyobservingpolarity.

6. Connectbatterytotheterminalsmarked[BAT+]and[DC-NEG](batteryleadsincluded).

Note:Whenbatteriesarenotused,alossofACwillresultinthelossofoutputvoltage.

AL624 Kits - Linear Power Supply/Chargers

Output:

• Seebelowforthespecificmodel.

• Filteredandelectronicallyregulatedoutput.

• Shortcircuitandthermaloverloadprotection.

Battery Backup:

• Built-inchargerforsealedleadacidorgeltypebatteries.

• Automaticswitchovertostand-bybatterywhenACfails.

• Maximumchargecurrent0.3amp.

•PTCbatteryprotection.

Visual Indicators:

• ACinputandDCoutputLEDindicators.

Features:

• Extremelycompactdesign.

• Batteryleadsincluded.

Board Dimensions (W x L x H approx.):

2.5”x3”x1.5”(63.5mmx76.2mmx38.1mm)

PAGE 1
AL624 Kits - Linear Power Supply/Chargers Overview: These linear power supply/charger kits have a wide range of applications including: access control, security and CCTV system accessories that require additional power. Specifications: Visual Indicators: Output: • See below for the specific model. • Filtered and electronically regulated output. • Short circuit and thermal overload protection. Battery Backup: • • • • Built-in charger for sealed lead acid or gel type batteries.
PAGE 2
FACTORY SET AT 12V CUT J1 FOR 24V CUT J2 FOR 6V J1 J2 DC AC AC AC +DC - BAT + LED Diagnostics: Red (DC) Green (AC) Power Supply Status ON ON Normal operating condition. ON OFF Loss of AC. Stand-by battery supplying power. OFF ON No DC output. Short circuit or thermal overload condition. OFF OFF No DC output. Loss of AC. Discharged or no battery present. Terminal Identification: Terminal Legend Function/Description AC/AC Low voltage AC input. - DC + 12VDC @ 1.