Data Sheet

eBridge100RM - IP and PoE+ over
Coax or Extended Ethernet Cable Receiver
Rev. DSeBridge100RM_11172015
Specifications
eBridge100RM is a versatile dual solution Ethernet receiver/media converter
which transmits data at 100Mbps full duplex and power over Coax cable or
extended CAT5e cable in a PoE+ compliant format. The eBridge100RM is
powered via a PoE midspan such as the Altronix NetWay series or by an
endspan. The receiver passes the PoE(+) compliant power over cable to the
eBridge100TM/eBridge100ST transceiver which in turn passes this power to an
enabled IP Camera/device. These plug and play units facilitate cost effective
solutions for IP devices that need to be installed at distances greater than 100m.
They also provide a simple way to replace legacy analog products with new IP
devices over existing coax or structured cable.
Overview
Input:
• Powered by midspan or endspan.
PoE compliant to IEEE 802.3af (15W) and
PoE+ compliant to IEEE 802.3at (30W).
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5.
• Distance: up to 500m.
• Speed: 10/100BaseT, half/full duplex,
auto negotiation.
PoE compliant to IEEE 802.3af (15W) and PoE+
compliant to IEEE 802.3at (30W) delivered to camera
by eBridge100TM. Power provided by eBridge100RM
to eBridge100TM by PoE protocol.
• Throughput is rated to pass 100mbps of data at
distances up to 500m.
Coax link:
• Distance: Coax 300m for power delivery.
• Connectivity: BNC, RG-59/U or similar.
Coax or CAT5e link:
• Distance: CAT5e up to 500m, Coax 300m
for power delivery.
LED Indicators:
• eBridge100RM and eBridge100TM:
Yellow - PoE ON (by respective RJ45 jack).
• eBridge100RM and eBridge100TM:
Yellow and Green LED (RJ45) IP Link
status, 10/100Base-T/active.
Environmental:
• Operating Temperature:
-20ºC to 49ºC (-4ºF to 120.2ºF).
• Storage Temperature:
-30ºC to +70ºC (-22ºF to 158ºF).
• Humidity: 20 to 85%, non-condensing.
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog
CCTV installation.
• Works with Megapixel, HD720, HD1080 ,and VGA
(SD) cameras.
• Extend Network link distance in an industrial
environment over 610m.
• Upgrade deployed CCTV Coax to a digital network in
Retail, Casinos, Airports, Schools, Hospitals, etc.
Compatible Transceivers:
• eBridge100TM: PoE/PoE+ compliant transceiver.
• eBridge100ST: PoE/PoE+ compliant mini-transceiver.
Mechanical:
• Dimensions (W x L x H approx.):
3.5” x 4.375” x 1” (88.9mm x 111.1mm x 25.4mm).
• Product weight: 0.25 lbs. (0.11 kg)
• Shipping weight: 0.4 lbs. (0.19 kg).
Agency Approvals
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
European Conformity
C-Tick Compliant
Z1409
eBridge100RM