Data Sheet
eBridge100ST EoC transceiver transmits data at 100Mbps, Full Duplex over Coax
cable to a paired eBridge receiver and provides power in a PoE+ compliant format
to an enabled device/camera. The eBridge receiver is available in various options
(see compatibility list below/Altronix.com) and is powered by an external midspan,
such as the Altronix Netway series. The receiver passes PoE+ power over the same
coax cable to the eBridge100ST transceiver, which, in turn, passes this power to an
enabled IP camera/device. These plug and play units facilitate cost-effective solutions
for IP devices. They can be installed at distances greater than 300m. They provide a
simple way to replace legacy analog products with new IP devices over existing coax.
eBridge100ST is compatible with the following Altronix receivers: eBridge100RM,
eBridge400PCRM, eBridge800PCRM or eBridge1600PCRM.
eBridge100ST
EoC and PoE/PoE+ Transceiver
Rev. DSeBridge100ST_02182016
Specifications
Overview
Agency Approvals
European Conformity
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
eBridge100ST
Input:
• PoE compliant to IEEE 802.3af (15W) and
PoE+ compliant to IEEE 802.3at (30W) from
eBridge receivers.
Compatible Receivers:
• eBridge100RM, eBridge400PCRM,
eBridge800PCRM, and eBridge1600PCRM.
Visit www.altronix.com for the latest
compatibility list.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5.
• Distance: up to 500m.
• Speed: 10/100BaseT, half/full duplex,
auto negotiation.
PoE compliant to IEEE 802.3af (15W) and PoE+
compliant to IEEE 802.3at (30W) Delivered to
camera by eBridge100ST. Power provided by
eBridge receiver to eBridge100ST by PoE protocol.
• Throughput is rated to pass 100mbps of data at
distances up to 500m.
Coax Link:
• Distance: Coax 300m for power delivery.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
• Yellow - PoE ON (by respective RJ45 jack).
• Yellow and Green LED (RJ45) IP Link status,
10/100Base-T/active.
• Blue: Coax Link is active.
Environmental:
• Operating Temperature:
For 15W: --- 40ºF to 167ºF (--- 40ºC to 75ºC).
For 30W: -- 40ºF to 140ºF (--- 40ºC to 60ºC).
• Storage Temperature:
-- 40ºF to 167ºF (--- 40ºC to 75ºC).
• Humidity: 20 to 85%, non-condensing.
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog CCTV
installation.
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras.
• Extend Network link distance in an industrial
environment over 610m.
• Upgrade deployed CCTV Coax to a digital network
in Retail, Casinos, Airports, Schools, Hospitals, etc.
Mechanical:
• Dimensions (W x L x H approx.):
2.27” x 2.645” x 1.12” (57.66mm x 67.18mm x 28.44mm)
• Product weight: 0.22 lbs. (0.1 kg).
• Shipping weight: 0.4 lbs. (0.18 kg).