IP and PoE+ over Coax Solution PLUS Installation Guide Models Include: eBridge8PCRM - Eight (8) Channel Receiver eBridge16PCRM - Sixteen (16) Channel Receiver Z1409 I.T.E. 43KC Rev. 072412 More than just power.
Overview: The eBridge8PCRM/16PCRM and eBridge1PCTX are CAT5 to Coax cable Ethernet adapters/Media converters that deliver data and power over the coax cable in a PoE+ compliant format. The paired set enables fast 10/100Base-T Ethernet digital communication to be transmitted over Coax cable.
Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading. Circuit Overloading - Consideration should be given to the connection of the equipment to supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate rating should be used when addressing this concern.
Fig. 2 eBridge1PCTX Green LED indicates Power Structured Cable from IP Camera/Device Blue LED indicates Coax Connection Coax Cable from eBridge8PCRM/16PCRM Multiple PoE camera connection: eBridge8PCRM shown. eBridge16PCRM is similar, with twice as many channels. Fig. 3 PoC (PoE+ over Coax) 457m max. PoC (PoE+ over Coax) 457m max. PoC (PoE+ over Coax) 457m max. eBridge8PCRM PoC (PoE+ over Coax) 457m max. PoC (PoE+ over Coax) 457m max. PoC (PoE+ over Coax) 457m max. 100m max. 100m max. 100m max.
Technical Specifications: Parameter Connections Input power requirements Description BNC for Coax link. RJ45 for ethernet link. Midspan or endspan port connected. Blue: Coax Link. Yellow (RJ45 connector): On - Link, Off - No Link, Blinking - Activity. Green (RJ45 connector): On - 100Base-TX, Off - 10Base-T. Green: Power. Operating Ambient Temperature: UL60950-1 eBridge8PCRM/16PCRM: -- 4ºF to 120.2ºF (-- 20ºC to +49ºC). eBridge1PCTX: --- 4ºF to 120.2ºF (-- 20ºC to +49ºC).
Mounting Options: Rack Mount Installation 1- Remove and discard factory installed screws from both sides of rack chassis (Fig. 4a). 2- Install mounting brackets (A) on the left and right side of rack chassis using the four (4) flat head screws (B) (included) (Fig. 4b). 3- Place unit into desired EIA 19” rack position and secure with mounting screws (not included) (Fig. 4c). Fig. 4 Fig. 4a Fig. 4b Top Fig.
Enclosure Dimensions (H x W x D approximate): 1.625” x 19.125” x 8.5” (42mm x 486mm x 216mm) eBridge16PCRM shown. eBridge8PCRM is similar. 10/100 Base-T 1 2 3 10/100 Base-T 4 5 6 7 10/100 Base-T 8 9 10 11 10/100 Base-T 12 13 14 15 16 19.125" 486mm 0.75" 19.05mm 17.625" 447.7mm 8.5" 216mm 1.
Notes: Altronix is not responsible for any typographical errors. 140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056 website: www.altronix.com, e-mail: info@altronix.com, Lifetime Warranty, Made in U.S.A.
