Installation Guide

Overview:
Altronix GB1 adapter plate facilitates mounting the Genetec
TM
Synergis Cloud Link
TM
to Trove Series HID/VertX or Mercury backplanes.
Specifications:
Installation Instructions:
1. Fasten standoffs (provided) to pems which match the hole pattern for GB1 plate (Fig. 1, pg. 1) on TM2 (Fig. 2, pg. 1), TV2 (Fig. 3, pg. 1)
and/or TMV2 (Fig. 4, pg. 2)
.
2. Affix GB1 to standoffs using 3/8” pan head screws (provided).
Hardware:
GB1
Genetec
TM
Cloud Link
TM
Adapter Plate
Installation Guide
• Conveniently mounts to Altronix enclosures that accommodate
Power Distribution Modules.
• Accommodates one (1) Genetec Synergis Cloud Link.
• 16 AWG steel.
• Mounting hardware included
• Dimensions (L x W x D):
7.0” x 4.1875” x 0.375” (177.8mm x 106.4mm x 9.5mm).
Spacer | 5/16” Pan Head Screw
Fig. 1 - GB1 Adapter Plate
Fig. 2 - TM2 Altronix/Mecury Backplane Fig. 3 - TV2 Altronix/HID/VertX Backplane