Video • Data • Power Passive UTP Transceiver Hub with Integral Camera Power Installation Guide Models Include: HubSat4WP - Four (4) Channel Outdoor Passive UTP Transceiver Hub with Integral Camera Power HubSat42WP - Four (4) Channel Outdoor Passive UTP Transceiver includes four (4) HubWayAv Video Balun/Combiners HubSat43WP - Four (4) Channel Outdoor Passive UTP Transceiver includes four (4) HubWayDv Video Balun/Combiners Rev. 081809 More than just power.
Overview: Altronix HubSat4WP Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 4 camera channels in a wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayAv2, HubWayDv or HubWayDvi Video Balun/Combiners.
10. Set illuminated master power disconnect circuit breaker to the RESET (ON) position (Fig. 4a, pg. 6). Power LEDs (Green) of the HubSat4WP will illuminate when AC power is present (Fig. 2e, pg. 5) and HubWayAv, HubWayDv or HubWayDvi Video Balun/Combiner LEDs will illuminate indicating power is present (Fig. 3b, 3d, pg. 5). 11. Measure the output voltage at each Video Balun/Combiner (Figs. 3b, 3d, pg. 5) before making connections to each camera to ensure proper operation and avoid possible damage.
7. Connect the terminals marked [+ DATA -- ] of HubWayAv, HubWayAv2, HubWayDv or HubWayDvi Video Balun/Combiners to data input terminals of cameras for PTZ control (Figs. 3a-3e, pg. 5). Polarity must be observed. When using fixed cameras disregard this step. 8. Connect the BNC connector of HubWayAv, HubWayAv2, HubWayDv or HubWayDvi Video Balun/Combiners to the BNC video outputs of cameras (Figs. 3a-3e, pg. 5). 9. Set illuminated master power disconnect circuit breaker to the RESET (ON) position (Fig.
Fig. 2 - HubSat Circuit Board OFF 28VAC 24VAC 24VAC VIDEO1 AUX3 2d 28VAC AUX4 OFF 28VAC AUX2 OFF AUX1 OFF 28VAC 2c 2c 2b 24VAC VIDEO2 24VAC VIDEO3 2e VIDEO4 + DATA - 2a 2i PVD1 PVD2 DATA 1-4 VIDEO 1-4 PVD3 2f PVD4 2h 2g 2a - BNC Connector: Video in from remote camera 2g - Channels 1-4: Single CAT-5 or higher structured video out to DVR. cable out to HubWay, HubWayLD or HubWayLDH 2b - Output PTCs: Protects each output.
CAT-5 Structured Cable Wiring Color Codes and PIN Configurations 1 - White/Orange [VIDEO +] 2 - Orange [VIDEO -- ] 3 - White/Green [DATA +] 4 - Blue [AC 1] 5 - White/Blue [AC 2] 6 - Green [DATA -- ] 7 - White/Brown [AC 2] 8 - Brown [AC 1] Fig. 4 Fig. 4b 24VAC 24VAC AUX3 AUX4 28VAC 24VAC 0 (Br) BK 28VAC OFF 28VAC OFF AUX2 OFF AUX1 OFF 28VAC 24VAC 24(YL) VIDEO2 VIDEO3 VIDEO4 + DATA - VIDEO1 (ON) PVD1 PVD2 DATA 1-4 VIDEO 1-4 PVD3 PVD4 non power-limited Fig.
Typical Application Drawing HubSat4WP Passive UTP Transceiver Hub with Integral Camera Power: Fig.
The lightning flash with arrow head symbol within an equilateral triangle is intended to alert the user to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Pole Mounting Using Optional Pole Mount Kit PMK1 (not included): This installation should be made by qualified service personnel. This product contains no serviceable parts. PMK1 is intended for use with Altronix outdoor rated power supplies or accessories housed in WP1, WP2, WP3 and WP4 enclosures. Brackets are designed for use with the Wormgear Quick Release Straps (two included). 1. Thread one (1) wormgear quick release strap through the slots on the back of a mounting bracket (Fig. 8, pg. 9). 2.
Notes: - 10 - HubSat4DWP
Notes: - 11 - HubSat4DWP
Enclosure Dimensions (H x W x D approximate): 12” x 8” x 6” (304.8mm x 203.2mm x 152.4mm) 8” 203.2mm 6” 152.4mm MOUNTING PANEL GALVANIZED 4.05” 103mm 6.7” 170mm 13” 14” 355.6mm 330mm 12” 305mm 9.84” 250mm 0.08” 2mm CARBON STEEL SHEET 4.21” 107mm Altronix is not responsible for any typographical errors. 140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056 website: www.altronix.com, e-mail: info@altronix.com, Lifetime Warranty, Made in U.S.A.
