Data Sheet

Altronix HubWay16CD Passive UTP Transceiver
Hub w/Integral Camera Power transmits UTP
video, RS422/RS485 data and power over a
single CAT-5 or higher structured cable. Unit
provides 16 camera channels in a space saving
1U EIA 19” rack mount chassis which may be rack, wall or shelf mounted. Video
transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras
when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi Video Balun/Combiners. In addition, the unit fea-
tures individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression. An optional
HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to trans-
mit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay16CD. In addi-
tion, the HubSat4D provides power to these cameras locally to eliminate the possibility of voltage drop associated
with long cable runs.
Input:
• 115VAC 60Hz, 3 amp.
Video:
• Sixteen (16) channels of video over twisted pair
up to a distance of 750 ft. per channel.
• Sixteen (16) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Individually selectable 24VAC or 28VAC power
outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to
exceed a total of 10 amp (300VA) maximum current.
• Class 2 Rated power limited outputs.
• PTC protected outputs are rated @ 1 amp
per channel.
• Surge suppression.
Visual Indicators:
• AC input power indicator.
• Sixteen (16) individual power LED indicators.
Features:
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U EIA 19” rack mount chassis.
Accessories:
• Optional HubSat4D allows transmission of up to
four (4) video signals over a single CAT-5 or higher
structured cable.
• Video Balun/Combiners:
- HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
cameras without isolation.
Shipping Weight (approximate):
- HubWay16CD: 19.75 lbs.
- HubWay162CD: 21.15 lbs.
- HubWay163CD: 22.15 lbs.
HubWay16CD
Sixteen (16) Channel Passive UTP T
ransceiver
Hub with Integral Camera Power
HubWay162CD
Sixteen (16) Channel Passive UTP Transceiver with
sixteen (16) HubW
ayAv Video Balun/Combiners
HubWay163CD
Sixteen (16) Channel Passive UTP T
ransceiver with
sixteen (16) HubWayDv Video Balun/Combiners
HubWay
®
16CD Passive UTP Transceiver Hub
with Integral Camera Power
Rev. DSHubWay16CD - E18I
Overview
Specifications
Models
Agency Approvals
UL Listed for Commercial CCTV Equipment
(UL 2044).
CUL Listed - CSA Standard C22.2 No.1-04,
Audio, Video and Similar Equipment.