Installation

ManualsBrandsAltronix ManualsUTP Transmission & Baluns16 Channel Passive UTP Transceiver Hub, 115VAC

Rev. 032108

Passive UTP Transceiver Hub

with Integral Camera Power

Installation Guide

Models Include:

HubWay8CD HubWay16CD

- UL Listed eight (8) Channel Passive UTP - UL Listed sixteen (16) Channel Passive UTP

Transceiver Hub with Integral Camera Power Transceiver Hub with Integral Camera Power

HubWay82CD HubWay162CD

- UL Listed eight (8) Channel Passive UTP - UL Listed sixteen (16) Channel Passive UTP

Transceiver Hub with Integral Camera Power Transceiver Hub with Integral Camera Power

- Includes eight (8) UL Listed Accessory - Includes sixteen (16) UL Listed Accessory

HubWayAv Video Balun/Combiners HubWayAv Video Balun/Combiners

HubWay83CD HubWay163CD

- UL Listed eight (8) Channel Passive UTP - UL Listed sixteen (16) Channel Passive UTP

Transceiver Hub with Integral Camera Power Transceiver Hub with Integral Camera Power

- Includes eight (8) UL Listed Accessory - Includes sixteen (16) UL Listed Accessory

HubWayDv Video Balun/Combiners HubWayDv Video Balun/Combiners

More than just power.

Video • Data • Power

Summary of content (8 pages)

PAGE 1
Video • Data • Power Passive UTP Transceiver Hub with Integral Camera Power Installation Guide Models Include: HubWay8CD HubWay16CD - UL Listed eight (8) Channel Passive UTP Transceiver Hub with Integral Camera Power - UL Listed sixteen (16) Channel Passive UTP Transceiver Hub with Integral Camera Power HubWay82CD HubWay162CD - UL Listed eight (8) Channel Passive UTP Transceiver Hub with Integral Camera Power - Includes eight (8) UL Listed Accessory HubWayAv Video Balun/Combiners - UL Listed sixtee
PAGE 2
Overview: Altronix HubWay8CD/16CD Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 or 16 camera channels in a space saving 1U EIA 19” rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or HubWay Dvi Video Balun/Combiners.
PAGE 3
Installation Instructions: 1. Attach mounting brackets to HubWay unit for rack or wall mount installation (Figs. 6-7, pg. 8). Affix rubber pads to HubWay for shelf installation (Fig. 8, pg. 8). 2. Secure the unit in a rack, mount unit to a wall or place unit on a shelf as desired (unit should be spaced at least 3” from any video monitors). 3. Set illuminated master power disconnect circuit breaker to the (OFF) position (Fig. 5, pg. 7). 4.
PAGE 4
-4- 16 15 1f - BNC Connector: Video outputs to head end equipment (DVR). Rear OFF RESET Front 1 14 2 3 13 4 12 + DATA 1-8 CH 1-4 11 5 6 10 7 9 8 28VAC OFF 24VAC CH 5-8 1c - LED(s) 1-16: Power indicators. 8 7 9 6 10 1d - Output voltage switches: Selects 24VAC/28VAC/OFF for each output. 1b - Channels 1-4, Channels 5-8, Channels 9-12 & Channels 13-16: CAT-5 or higher structured cable from optional HubSat4D enables video transmission from up to four (4) cameras.
PAGE 5
Ca m era Po we rL ED Ty pe Ou t to put V ca o m lta era ge Altronix Model Number In p fro ut V m o un H ltag it ub e W ay HubWayAv, HubWayDv and HubWayDvi Video Balun/Combiners: HubWayAv *24VAC/28VAC *24VAC/28VAC 24VAC cameras Green HubWayDv *24VAC/28VAC 12VDC 12VDC cameras Red HubWayDvi *24VAC/28VAC 12VDC electronically isolated 12VDC cameras without isolation Red *Based on camera load and structured cable length. Fig. 2 Fig. 2c Fig.
PAGE 6
Typical Applications: Fig. 4 Head End Equipment (DVR) RS485 Monitor Video Data Rear 8 7 6 5 4 3 2 1 AC POWER 1 2 3 4 CH 1-4 5 6 7 + DATA 1-8 8 CH 5-8 28VAC OFF 24VAC Front CAT-5 Video Power Video Power Four (4) Video signals on a single CAT-5 Video Data Power Data (CAT-5) CAT-5 CAT-5 Max. video 750 ft.
PAGE 7
1U EIA 19” Rack Mount Chassis Mechanical Drawing & Dimensions: 1.625”H x 19.125”W x 8.5”D REAR 1.625" 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 AC POWER TOP & BOTTOM 17.625" 8.5" FRONT 1 2 3 4 CH 1-4 + DATA -1-8 5 6 7 8 CH 5-8 9 28VAC OFF 24VAC 10 11 12 CH 9-12 13 14 15 + DATA -9-16 16 CH 13-16 28VAC OFF 24VAC 19.125" .75" (ON) Fig. 5 Illuminated master power disconnect circuit breaker: • OFF position Circuit breaker tripped – Switch not illuminated.
PAGE 8
Mounting Options: Rack Mount Installation 1- Remove and discard factory installed screws from both sides of rack chassis (Fig. 6a). 2- Install mounting brackets (A) on the left and right side of rack chassis using the four (4) flat head screws (B) (included) (Fig. 6b). 3- Place unit into desired EIA 19” rack position and secure with mounting screws (not included) (Fig. 6c). Fig. 6 Fig. 6b Fig. 6a Fig.