Installation Instructions
NetWay1DWP/NetWay1DWPH/NetWay1DWPM/NetWay1DWPMH - 5 -
monitor your NetWay1DWPM/H on a LAN, you can use port 80 and you don’t have to concern yourself with routers.
However, if you desire remote access to your NetWay1DWPM/H, you MUST select functional ports and set up the
port forwarding in your router. Other ports, such as 8080 and 8000, are sometimes blocked by ISPs as well.
What port(s) should be used? There are 65,535 valid IP ports to choose from.
These are broken down into three groups:
• Well Known Ports 0 through 1023.
• Registered Ports 1024 through 49151.
• Dynamic and/or Private Ports 49152 through 65535.
So, rather than encounter a port conflict by choosing a port commonly used for another purpose (like port 25 for SMTP
mail or port 448 for secure sockets), choose an ‘unusual’ port number. For example, add 50,000 to your house number:
50,123 is less likely to lead to a port conflict. For a list of the known and registered ports,
see http://www.iana.org/assignments/port-numbers.
Fig. 6 - Setup
Authenication Required pop-up
box will appear the default
User name: admin
Password: admin
Fig. 7 - Setup
You may now configure the
NetWay1DWPM/H unit settings
and Change the Username
and Password (located on the
bottom of Setup screen).
Management Interface
Version 0.88
Status
NetWay Setup
x
x
Setup Network Settings
NetWay1DWPM
Setup
192.168.168.168/setup.htm
Update Site ID
Site ID:
Altronix Site ID
Update Sync Date/Time with computer
Date/Time:
November
Security Settings:
Username: admin Password: • • • •
12 10 23 53 pm
][
2014
Disable Port
Save Username and Password
Port Status:
Spare Pair
EnabledDisable Port
Port Status:
Data Pair
Enabled
Change Username and Password
®
Management Interface
Version 0.88
Status
NetWay Setup
x
x
Setup Network Settings
NetWay1DWPM
Setup
192.168.168.168/setup.htm
Update Site ID
Site ID:
Altronix Site ID
Update Sync Date/Time with computer
Date/Time:
November
Security Settings:
Username: admin Password: • • • •
12 10 23 53 pm
][
2014
Disable Port
Save Username and Password
Port Status:
Spare Pair
EnabledDisable Port
Port Status:
Data Pair
Enabled
Change Username and Password
®