NETWAY8G-Installation -Guide

- 4 - NetWay8G
Fig. 2 - NetWay8G
2a OUT 1-8: Structured cable to PoE compliant cameras/edge devices.
2b IN 1-8: Structured cable to ethernet switch or video server.
2c LED(s) 1-8: Port status LEDs.
2d Reset: Restores unit to factory settings.
2e USB Port: For future use.
2f Ethernet: For future use.
2g IEC 320 Connector: 115/230VAC (grounded line cord included).
2h Built-in battery charger: Charges stand-by batteries for applications requiring back-up,
(optional rack mount battery enclosure available - RE2)
Fig. 3 - NetWayXT/NetWayXTX
Installing a NetWayXT/NetWayXTX Repeater Module:
NetWayXT will work only with PoE devices. NetWayXTX will work with PoE/PoE+ devices.
1. Mount NetWayXT/NetWayXTX in desired location utilizing the mounting hole (Fig. 3, pg. 4).
Use a proper fastener and/or wall anchor when securing NetWayXT/NetWayXTX to the wall.
2. Connect structured cable from port marked [OUT] on NetWay8G to port marked [IN] on the
NetWayXT/NetWayXTX (Fig. 3, pg. 4).
3. Connect structured cable from port marked [OUT] on NetWayXT/NetWayXTX to the PoE/PoE+ camera/
edge device or next NetWayXT/NetWayXTX repeater (Fig. 3, pg. 4).
4. Port status LEDs will illuminate on NetWayXT/NetWayXTX indicating the port is operational
(refer to LED Definitions, pg. 4).
5. Power LED will illuminate indicating 12VDC output.
Port LED Definitions for NetWayXT and NetWayXTX Repeaters:
Status
NetWayXT NetWayXTX
Green LED Yellow LED
PoE/PoE+
Output LED
PoE/PoE+
Input LED
Yellow LED
OFF
Indicates it is connected as
10Base-T or no link.
Indicates no link.
No PoE/PoE+
Output
No PoE/PoE+
Input
Indicates no link.
ON
Indicates it is connected as
100Base-TX.
Indicates a link.
Normal PoE/PoE+
Output
PoE/PoE+ Input Indicates a link.
Blinking – Indicates activity. – – Indicates activity.
Power
LED
Structured
Cable from
NetWayG
Structured
Cable from
NetWayG
Structured Cable
to IP Camera/
Edge Device
or next
NetWayXT
PoE/PoE+
Output
LED
Structured
Cable to
PoE/PoE+
Camera/Device or
next NetWayXTX
Port Status
LEDs
PoE/PoE+
Input
LED
NetWayXT
NetWayXTX
NetwayXT
Repeater
IN
OUT
Power
I.T.E. 43KC
www.altronix.com
Made in U.S.A.
NetWay8G - Rear Panel
NetWay8G - Front Panel
2a 2b 2c
2d
2f
2e
2h2g