Data Sheet

Pace1PRMT is a long range Ethernet adapter kit which transmits data at
100mbps full duplex and power via a single twisted pair (UTP) or Cat5e
or higher cable in a PoE(+) compliant format. The Pace1PRM receiver
is powered via a PoE midspan such as the Altronix Netway series or by
an endspan. The receiver passes the PoE(+) compliant power over the
cable to the Pace1PTM transceiver which in turn passes this power to an
enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP
devices that need to be installed at distances greater than 100m. They also provide a simple way
to replace legacy analog products with new IP devices over single twisted pair (UTP) or structured cable.
Pace1PRMT - IP and PoE+ Over Extended
Distance UTP or CAT5e
Rev. DSPace1PRMT_10022015
Specifications
Agency Listings:
• UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
• CE approved.
• C-Tick compliant.
Input (Pace1PRM):
• Powered by midspan or endspan.
PoE compliant to IEEE 802.3af (15W) and
PoE+ compliant to IEEE 802.3at (30W).
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5e or a single twisted pair UTP.
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
PoE compliant to IEEE 802.3af (15W) and PoE+
compliant to IEEE 802.3at (30W) delivered to
camera by Pace1PTM. Power provided by
Pace1PRM to Pace1PTM by PoE protocol.
• Throughput is rated to pass 100mbps of data.
UTP (Single Twisted Pair UTP):
• Distance: up to 152m @ 100mbps.
CAT5e or Higher:
• Distance: up to 500m @ 100mbps.
LED Indicators:
• Pace1PRM/Pace1PTM:
Green - PoE ON (by respective RJ45 jack).
LED Indicators (cont’d):
• Pace1PRM/Pace1PTM (RJ45 jack):
Yellow and Green LED IP Link status,
10/100Base-T/active.
Environmental:
• Operating temperature Pace1PRM/Pace1PTM:
-- 20ºC to +49ºC (-- 4ºF to 120.2ºF).
• Storage temperature:
-- 30º to +70ºC (-- 22º to 158ºF).
• Humidity: 20 to 85%, non-condensing.
• Relative humidity: 20 to 85%, non-condensing.
• Operating altitude: -- 304.8 to 2000m
(-- 1000 to 6,561.679 ft.).
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog CCTV
CAT5e or UTP installations.
• Extend Network link distance in an industrial
environment.
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras with proper head end equipment.
Mechanical:
• Dimensions (W x L x H approx.):
3.5” x 3.5” x 1” (88.89mm x 88.89mm x 25.4mm).
Overview
Agency Approvals
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
European Conformity
C-Tick Compliant
Z1409
Pace1PRM
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Pace1PTM